USA INDUSTRIALS BULK-CGF-333 Cam and Groove Fitting 304SS DC 1" Coupler Dust Cap

1-inch Stainless-Steel Dust Cap

This USA INDUSTRIALS cam-and-groove dust cap seals a 1-inch coupler socket to keep debris and moisture out of fluid lines. The 304 stainless-steel body resists corrosion in wash-down and outdoor environments. A nitrile gasket provides a tight seal without the need for a locking arm. The cap slips on and off quickly during routine maintenance or line changes.

250 psi Rating with 57.4 mm Length

The fitting handles working pressures up to 250 psi in water, air or light-oil service. Its 57.4 mm overall length adds minimal bulk to the coupling face. The 1 7/16-inch socket bore matches standard 1-inch cam-and-groove profiles. Pressure spikes above the rated limit or aggressive chemicals outside nitrile compatibility will exceed the design envelope.

Fits Standard 1-inch Couplers

The cap mates with any 1-inch Type DC socket, so it integrates into existing hose assemblies, tank outlets or pump ports without adapters. Transparent colour lets operators confirm the gasket is seated before pressurising. No locking arm means faster removal when frequent access is required. Systems needing positive-lock retention or larger diameters will need a different cap style.