We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with two CAN ports and one Ethernet port

UOTEK

UOTEK UT-6502 2-Port CAN Bus to Ethernet Data Converter

SKU CH-TQFP-4RCJM

Industrial CAN-bus to Ethernet converter with two CAN ports, one 100M Ethernet port, 5Kbps-1Mbps configurable rate and 12-36V DC operation

  • TypeCANBUS protocol converter
  • Connector A2-port CAN-bus communication
  • Connector B1-port 100M Ethernet interface
  • Bidirectional CAN-to-Ethernet data conversion
  • Supports CAN 2.0 protocol standard
  • Dual CAN ports at 5 Kbps-1 Mbps
  • 100 M Ethernet with web configuration
  • Industrial 12-36 V DC, -40 to 85 °C

Two-Port CAN Bus to Ethernet Converter

The UOTEK UT-6502 bridges two CAN-bus channels with a single 100M Ethernet link, enabling bidirectional data exchange between fieldbus devices and TCP/IP networks. It targets engineers integrating legacy CAN 2.0 equipment into modern industrial Ethernet infrastructures without rewiring the entire plant.

100M Ethernet and CAN 2.0 rate limits

The Ethernet port operates at 10/100 Mbps, so throughput caps at 100 Mbps and cannot serve gigabit backbones. Each CAN channel is configurable from 5 Kbps to 1 Mbps, matching the CAN 2.0 specification; higher bit-rates or CAN FD frames are not supported by this hardware.

Industrial-grade isolation and rugged mounting

Isolation voltage reaches 1000 VDC between communication interfaces and the system, while surge protection handles 2 kV common-mode on power and network ports and 600 W on CAN ports. The unit accepts 12-36 V DC at 150 mA and operates from -40 °C to 85 °C with 5-95 % non-condensing humidity, suiting DIN-rail cabinets in harsh environments.

Highlights

  • Bidirectional CAN-to-Ethernet data conversion
  • Supports CAN 2.0 protocol standard
  • Dual CAN ports at 5 Kbps-1 Mbps
  • 100 M Ethernet with web configuration
  • Industrial 12-36 V DC, -40 to 85 °C

Specifications

BrandUOTEK
ModelUT-6502
TypeCANBUS protocol converter
Connector A2-port CAN-bus communication
Connector B1-port 100M Ethernet interface

Questions about this item

Should I choose the single Ethernet port or add a second CAN port for my setup?

The UT-6502 has one 100M Ethernet port and two CAN ports built in; you cannot change that mix.

What does the 1 Mbps CAN rate mean when the converter is installed in a vehicle network?

Each CAN port can run from 5 Kbps up to 1 Mbps, so the device handles standard automotive and industrial bus speeds without bottlenecks.

How does the 100M Ethernet interface limit real-world throughput between CAN and IP networks?

The Ethernet link caps at 100 Mbps, so aggregated CAN traffic from both ports must stay below that ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.