We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UOTEK UT-2112 isolated DB9 female to DB9 male converter in black enclosure

UOTEK

UOTEK UT-2112 Isolated Data Converter DB9 Female to DB9 Male 2500Vrms

SKU CH-JCCF-Z8NBA

DB9 female-to-male isolated converter protecting RS-232 links with 2500Vrms optoelectronic isolation across 300-115200BPS baud rates

  • TypeIsolated Converter
  • Connector ADB9 Female
  • Connector BDB9 Male
  • 2500Vrms isolation protects serial ports from surges and ground loops
  • Full-duplex asynchronous transmission at up to 115200BPS with no data loss
  • DB9 female to DB9 male connects legacy RS-232 equipment directly
  • Wide 9V to 48V DC input suits industrial power environments
  • Operates reliably from -40°C to 85°C in harsh conditions

Industrial RS-232 Isolation Adapter

The UOTEK UT-2112 is a new DB9 female-to-male isolated converter built to the EIA RS-232 and CCITT V.24 asynchronous standards. It provides 2,500Vrms impulse and 500VDC continuous isolation to protect serial ports from ground-loop voltages, surges, lightning, ESD and electromagnetic interference. The unit operates at 300 to 115,200BPS in full-duplex, full-transparent mode and accepts a 9V to 48V DC supply across a -40 to 85 Celsius range.

Suited for point-to-point RS-232 links needing

Engineers integrating industrial PLCs, meters or legacy equipment where ground potential differences reach 50V to 80V will benefit from the optoelectronic barrier. The adapter is not for systems that require multi-drop networking, differential signalling or powered DB9 pins beyond the 9V to 48V input range. Buyers needing USB, Ethernet or fibre interfaces should select a different converter class.

2,500Vrms impulse isolation rating

This single figure defines whether the adapter can withstand the transient voltages present in a specific installation. If the environment routinely exceeds 2,500Vrms impulse or 500VDC continuous potential between grounds, the UT-2112 will not provide adequate protection and a higher-rated isolator must be sourced.

Highlights

  • 2500Vrms isolation protects serial ports from surges and ground loops
  • Full-duplex asynchronous transmission at up to 115200BPS with no data loss
  • DB9 female to DB9 male connects legacy RS-232 equipment directly
  • Wide 9V to 48V DC input suits industrial power environments
  • Operates reliably from -40°C to 85°C in harsh conditions

Specifications

BrandUOTEK
ModelUT-2112
TypeIsolated Converter
Connector ADB9 Female
Connector BDB9 Male

Questions about this item

How can I verify the UT-2112 is isolating correctly after installation?

Measure the ground voltage difference between the two connected devices; if it stays below 50V and data flows at the configured baud rate up to 115200BPS without errors, the 2500Vrms isolation is functioning.

What comes in the box with the UT-2112 and what must I source separately?

The converter itself with DB9 female and DB9 male connectors is included; you must supply a DC power source between 9V and 48V and the RS-232 cables for your equipment.

Which baud-rate setting should I choose for the UT-2112?

Select any rate from 300BPS to 115200BPS that matches both connected devices; the adapter handles the full range transparently.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.