Unique-Bargains USB Male-to-Male Extender 2pcs 44mm

USB Male-to-Male Extender — what it does

This Unique-Bargains USB extender has a male Type-A connector on each end so you can join two standard female USB-A cables or change a male port to female. It supports data rates up to 480 Mbps and works with printers, scanners, webcams, keyboards and similar peripherals. The fully moulded body measures 44 x 17 x 10.5 mm and uses silver-plated contacts for reliable signal transmission. No drivers are required; just plug and play.

Before ordering — check your cables and ports

Verify that both cables you intend to link have female USB-A sockets, because this adapter only mates with female connectors. Confirm the connected devices operate at USB 2.0 speeds or lower, since the 480 Mbps limit matches that standard. Ensure there is enough physical space for the 44 mm length and 17 mm width where the joint will sit. The pack contains two identical extenders for separate connections.

Thermals, noise and power draw

As a passive copper cable assembly the extender draws no power of its own and adds no active cooling, so it produces zero noise and negligible heat during normal use. Power delivery is limited to what the host port and connected device negotiate, typically the standard USB 2.0 current. Silver-plated contacts keep resistance low, preventing measurable voltage drop across the short 44 mm link.