We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two square grey silicone thermal pads, 100 by 100 by 2 mm

Unique-Bargains

Unique-Bargains Thermal Pad 100x100x2mm 1.5W/mK Gray Pack of 2

SKU CH-0N9Q-ZVCGB

Soft silicone thermal pads fill gaps between heatsinks and components to improve heat transfer at 1.5 W/m·K conductivity

  • Bridges uneven surfaces for better heat transfer using 1.5 W/m·K silicone pads
  • Soft low-hardness material cushions and dampens while maintaining good compression
  • Withstands operating temperatures from 50 to 200 °C
  • Simple three-step installation: clean surface, remove film, place pad
  • Pack includes two 100 mm square pads at 2 mm thickness

Gap-Filling Thermal Pads

These Unique-Bargains silicone pads measure 100 mm by 100 mm by 2 mm and come in a pack of two. They sit between a heatsink and a component to bridge uneven surfaces and improve thermal transfer. The gray pads are rated at 1.5 W/m-K conductivity and withstand temperatures from 50 to 200. Builders who need a soft, compressible interface material for custom cooling setups will find them useful.

Build Integration

The low-hardness silicone compresses easily, providing damping and cushioning while conforming to irregular gaps. Installation requires only a clean surface, removal of the protective film, and placement of the pad where needed. No curing time or paste application is involved, so the pads free up workflow steps compared to liquid compounds. They suit one-off repairs or small-batch assembly where precise thickness matters.

Upgrade Context

These pads replace dried or missing thermal interfaces on memory modules, VRM heatsinks, or small-chip coolers where a 2 mm gap exists. The jump is worth it when the original material has degraded or when a thicker pad is required to make contact across uneven surfaces. They are not for buyers who need higher conductivity than 1.5 W/m-K or a different thickness for their specific assembly.

Highlights

  • Bridges uneven surfaces for better heat transfer using 1.5 W/m·K silicone pads
  • Soft low-hardness material cushions and dampens while maintaining good compression
  • Withstands operating temperatures from 50 to 200 °C
  • Simple three-step installation: clean surface, remove film, place pad
  • Pack includes two 100 mm square pads at 2 mm thickness

Specifications

BrandUnique Bargains

Questions about this item

What is the maximum operating temperature for these 100mm x 100mm x 2mm pads?

The pads withstand temperatures from 50 to 200 degrees Celsius, so sustained loads must stay within that range.

How much heat do the 1.5 W/m·K silicone pads add to the system during all-day use?

Being passive gap fillers, they generate no heat and consume no power; they simply conduct heat toward the heatsink.

Which components must already be in place before installing these gray thermal pads?

You need a heatsink or cooler and the target device such as a CPU, GPU or chipset, plus a clean mounting surface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.