We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square blue silicone thermal pad, 100 by 100 by .5 mm

Unique-Bargains

Unique-Bargains Thermal Pad 100x100x.5mm 1.5 W/m-K Blue

SKU CH-0WPG-6RAYK

Soft silicone pad fills gaps between heatsink and component for improved heat transfer at 1.5 W/m-K

  • Improves heat transfer with 1.5 W/m-K conductivity
  • Fills gaps between uneven surfaces for better contact
  • Soft silicone cushions and dampens vibration during operation
  • Withstands temperatures from 50 to 200 degrees Celsius
  • Easy three-step installation with protective film removal

Gap-Filler Thermal Pad

This 100mm by 100mm silicone pad sits between a heatsink and a component to bridge uneven surfaces and improve thermal transfer. The blue pad has a thermal conductivity of 1.5 W/m-K and withstands temperatures from 50 to 200 degrees Celsius. Its low-hardness construction provides damping and cushioning while maintaining good compression. The sheet is .5mm thick and sold individually.

Verify Thickness And Dimensions

Before ordering, measure the exact gap height between your heatsink and the target component to confirm that a .5mm pad matches the required clearance. Check that the 100mm by 100mm sheet is large enough for the contact area or can be trimmed without waste. Ensure the mating surfaces are clean and free of old compound so the pad makes full contact.

Protective Film And Manual Placement

Each pad ships with a plastic protective film that must be removed before installation. No additional tools, adhesives or software are included in the package. The installer simply peels the film, positions the pad on the cleaned surface, and mounts the heatsink. No curing time or re-application schedule is needed.

Highlights

  • Improves heat transfer with 1.5 W/m-K conductivity
  • Fills gaps between uneven surfaces for better contact
  • Soft silicone cushions and dampens vibration during operation
  • Withstands temperatures from 50 to 200 degrees Celsius
  • Easy three-step installation with protective film removal

Specifications

BrandUnique Bargains

Questions about this item

What comes in the box and is anything else needed for installation?

The package contains one 100 mm x 100 mm x 0.5 mm blue silicone thermal pad. No extra items are included; you only need to clean the component surfaces before applying the pad.

How do I decide which pad thickness and conductivity to select?

Choose the 0.5 mm thickness when the gap between the heatsink and component measures about half a millimetre, and the 1.5 W/m-K conductivity suits general-purpose CPU or GPU heat transfer.

What does the 1.5 W/m-K rating mean once the pad is fitted in a PC?

It indicates the pad will conduct heat at 1.5 watts per metre-kelvin, bridging uneven surfaces and improving thermal transfer to the heatsink within the 50 to 200 °C operating range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.