We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square grey silicone thermal pad, 100 by 100 by 1 mm, protective film visible

Unique-Bargains

Unique-Bargains Thermal Pad 100mm 1mm 1.5 W/mK Gray

SKU CH-SBAV-CVJ6F

A 100 mm square silicone thermal pad, 1 mm thick, rated at 1.5 W/m·K and usable from 50 to 200 °C

  • Bridges uneven surfaces for better heat transfer
  • 5 W/mK conductivity moves heat efficiently
  • Withstands 50 to 200 °C operating range
  • Low-hardness silicone cushions and dampens vibration
  • 100 mm square sheet cuts to custom shapes

What this pad does

The Unique-Bargains thermal pad is a 100 mm by 100 mm by 1 mm silicone sheet rated at 1.5 W/mK. It fills microscopic gaps between a component and its heatsink so heat moves more efficiently. The material stays flexible and provides a slight damping effect. It is sold as a single grey pad for new builds or maintenance.

Check thickness and surface fit

Before ordering, measure the gap you need to bridge and confirm that 1 mm matches the space between your chip and cooler. The pad must cover the entire contact area without overhang. Clean both surfaces thoroughly and remove the protective film before installation. The pad withstands temperatures from 50 to 200.

Replaces dried paste or missing pads

This pad replaces dried thermal compound or a missing factory pad on memory modules, VRM heatsinks or small ICs. The jump is worth it when the original material has hardened, torn or was never fitted and you need a clean, reusable interface. It is not for buyers who need a thinner or thicker layer, higher conductivity or a pre-cut shape for a specific GPU or CPU block.

Highlights

  • Bridges uneven surfaces for better heat transfer
  • 5 W/mK conductivity moves heat efficiently
  • Withstands 50 to 200 °C operating range
  • Low-hardness silicone cushions and dampens vibration
  • 100 mm square sheet cuts to custom shapes

Specifications

BrandUnique Bargains

Questions about this item

Does the 100 mm by 100 mm pad come pre-cut or must I trim it myself?

The pad arrives as a single 100 mm by 100 mm sheet; you cut it to the exact shape your component needs.

Is the 1.5 W/mK rating enough for a GPU memory module or should I choose a higher conductivity pad?

At 1.5 W/mK the pad suits general heatsink-to-chip gaps such as VRAM or VRM cooling; higher conductivity pads exist but are not required for typical uses.

Will the pad stay stable if my heatsink runs near the 200 °C upper limit?

The silicone withstands 50 to 200 °C, so it remains stable throughout that range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.