We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two square blue silicone thermal pads 100mm by 100mm by 1.5mm thick

Unique-Bargains

Unique-Bargains Soft Silicone Thermal Conductive Pads 100mmx100mmx1.5mm Blue Pack of 2

SKU CH-K7WP-E4AB7

Soft silicone thermal pads fill gaps between heatsinks and components to improve heat transfer at 1.5 W/m·K conductivity in 100 mm x 100 mm x 1.5 mm blue sheets

  • Improves heat transfer with 1.5 W/m-K conductivity
  • Fills uneven gaps between heatsink and device
  • Withstands temperatures from 50 to 200
  • Soft silicone dampens vibration and cushions components
  • Two 100 mm square pads at 1.5 mm thickness

What this product is

Unique-Bargains Soft Silicone Thermal Conductive Pads come as a pack of two blue squares measuring 100mm by 100mm and 1.5mm thick. Each pad has a thermal conductivity of 1.5 w/m-K and withstands temperatures from 50 to 200. They fill gaps between a heatsink and a component to improve heat transfer while providing damping and cushioning.

Who these suit and who should look elsewhere

Builders needing a soft, pre-cut gap filler for small chips or memory modules will find the 100mm size convenient. The low-hardness silicone compresses easily and stays pliable during assembly. Buyers who require higher thermal conductivity, larger sheet dimensions, or different thicknesses should look at other options because this pack only provides the stated 1.5mm pads.

Installation and common pitfalls

Installation is three steps: clean the mating surfaces, peel off the protective film, then press the pad into place. The soft material conforms well to uneven surfaces without excessive force. The most common mistake is skipping the cleaning step, which leaves dust or old compound that reduces thermal contact. Another error is selecting the wrong thickness for the gap, so verify the required spacing before fitting.

Highlights

  • Improves heat transfer with 1.5 W/m-K conductivity
  • Fills uneven gaps between heatsink and device
  • Withstands temperatures from 50 to 200
  • Soft silicone dampens vibration and cushions components
  • Two 100 mm square pads at 1.5 mm thickness

Specifications

BrandUnique Bargains

Questions about this item

What thickness gap between my heatsink and component will the 1.5 mm pad fill?

The pad is 1.5 mm thick and compresses to bridge uneven surfaces, so it suits gaps at or slightly above that measurement.

Will the 1.5 W/m-K conductivity handle the heat from an older GPU or CPU I am keeping?

At 1.5 W/m-K the pad transfers heat adequately for low-to-moderate power chips; higher-TDP parts may need a higher-conductivity pad.

How can I confirm the pads are seated correctly after installation?

After cleaning the surfaces, removing the protective film and pressing the pad in place, check that the heatsink makes even contact and that temperatures drop under load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.