We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten silver and black Micro USB female sockets with 180-degree pins

Unique-Bargains

Unique-Bargains Micro USB Female 5-Pin DIP 180° 10PCS

SKU CH-H6EA-BZ0YN

Pack of ten micro-USB 5-pin female sockets with 180-degree DIP pins for PCB repair or DIY power-port projects

  • Pack of ten connectors simplifies bulk repairs
  • 5-pin micro USB female socket fits standard ports
  • 180-degree DIP pins allow straight PCB mounting
  • Rated for 1A at 30V supports low-power devices
  • Compact 7.4mm x 6mm x 4mm body saves board space

Micro USB female socket, 5-pin DIP

This pack contains ten Micro USB female connectors with a 180-degree pin layout. Each jack is rated for 1 ampere at 30 volts and uses a 7.2 mm pin spacing. The compact body measures 7.4 mm by 6 mm by 4 mm and combines plastic housing with metal contacts in silver and black tones.

Suited to PCB repair and DIY power ports

Hobbyists and technicians who need to replace damaged Micro USB ports on circuit boards or mobile power modules will find these connectors a direct fit. Builders requiring a different pin angle, a higher current rating or a USB-C footprint should look for alternative parts.

Ten connectors enable multiple repairs

The ten-piece bundle lets you complete several board-level fixes or prototype runs without reordering. No cables, drivers or mounting hardware are included, so each socket must be soldered into the target PCB by the user.

Highlights

  • Pack of ten connectors simplifies bulk repairs
  • 5-pin micro USB female socket fits standard ports
  • 180-degree DIP pins allow straight PCB mounting
  • Rated for 1A at 30V supports low-power devices
  • Compact 7.4mm x 6mm x 4mm body saves board space

Specifications

BrandUnique Bargains

Questions about this item

Does the board need a 7.2 mm pad pitch to accept these 180 degree pins?

Yes, the pins are spaced at 7.2 mm so the PCB footprint must match that pitch for the connector to seat correctly.

Will the 1 A current rating support the same charging speed as the original port on an older phone?

The connector is rated at 1 A and 30 V, so it can carry the same current as most legacy Micro USB charging circuits that also operate at or below 1 A.

How can I confirm the solder joints are sound after fitting the connector?

Inspect each of the five pins for a smooth, shiny fillet and verify continuity from every pin to its corresponding trace with a multimeter before applying power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.