We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten blue rectangular LC duplex adapters with flange mounting, 35 by 22 by 9 millimetres

Unique-Bargains

Unique-Bargains LC-LC Duplex Adapter 10 Pack 35mm x 22mm x 9mm

SKU CH-7SW3-0SFTE

Connects two LC duplex patch cords with 0.2 dB insertion loss, includes ten flange-mount adapters for single-mode or multi-mode use

  • TypeFiber
  • Low insertion loss of .2 dB for clean signal transmission
  • Duplex LC-to-LC design connects two patch cords in one unit
  • Supports both single-mode and multi-mode fiber networks
  • Compact 35 mm by 22 mm by 9 mm flange fits dense patch panels
  • Pack of 10 adapters readies multiple rack connections

LC duplex adapter 10 pack

This pack contains ten LC to LC duplex fiber optic adapters with blue UPC/UPC ceramic sleeves. Each unit joins two LC single-mode or multi-mode patch cords in server racks, patch panels, optical communication systems, CATV and broadband access networks. The flange design allows quick field termination without specialised tools. Insertion loss is rated at 0.2 dB repeatability across the operating range of -20 °C to +70 °C.

Replaces inline splices and bulkhead couplers

The adapters upgrade from permanent fusion splices or fixed bulkhead couplers when moves, adds and changes are frequent. The jump is worth it for patch panels that need tool-less reconfiguration, for test labs that swap jumper cables daily, and for broadband installs where technicians must connect or disconnect OS1 9/125 cords without a fusion splicer on site. They are not for buyers who need angled APC polishing or a higher port density than a single duplex flange provides.

Flange mount snaps into standard cut-outs

Installation is a push-fit into a standard panel cut-out; no epoxy, polishing or crimping is required. The ceramic sleeve aligns the ferrule end-faces automatically, so the most common error is inserting a dirty or damaged connector that raises loss above the 0.2 dB spec. Always clean both ferrules before mating and verify the blue UPC housing matches the patch cord polish to avoid return-loss issues.

Highlights

  • Low insertion loss of .2 dB for clean signal transmission
  • Duplex LC-to-LC design connects two patch cords in one unit
  • Supports both single-mode and multi-mode fiber networks
  • Compact 35 mm by 22 mm by 9 mm flange fits dense patch panels
  • Pack of 10 adapters readies multiple rack connections

Specifications

BrandUnique Bargains
TypeFiber

Questions about this item

Will the 35mm by 22mm flange fit a standard keystone cut-out?

The adapter measures 35mm by 22mm by 9mm overall; verify your panel cut-out against those dimensions before mounting.

How do I install the LC duplex adapter without damaging the ceramic sleeve?

Align the keyed LC connectors with the blue UPC sleeves, push straight in until the latch clicks, and avoid angling the ferrules during insertion.

When should I replace the adapter if insertion loss rises above 0.2 dB?

If measured loss exceeds the rated 0.2 dB or return loss degrades, replace the coupler; the ceramic sleeve is rated for -20°C to +70°C operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.