We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9.8 ft IR emitter cable with 3.5 mm jack and angled red emitter head

Unique-Bargains

Unique-Bargains IR Emitter Extension Cable 9.8ft 3.5mm Jack 45° Red Head

SKU CH-R1D7-Y0NZB

Extends IR signals up to 9.8 ft with a 45° emission angle and 3.5 mm jack for remote control forwarding

  • TypeExtension Cables
  • Controls devices up to 18 m away with 3.5 mm plug
  • +/- 45° emission angle resists ambient light interference
  • 8 ft cable reaches hidden or distant equipment
  • Works with 38–56 kHz IR remotes and IR input ports
  • Low current draw extends range while keeping power use minimal

IR Emitter Extension Cable for Remote Control

This 9.8ft cable connects an IR forwarding device to equipment that accepts a 3.5mm IR input jack. It supports remote controls operating between 38 and 56kHz and provides a detecting distance of 10 to 18 metres. The single red emitter head is designed for discreet placement on audio, video or centralised control panels.

45° Emission Angle and Glued Emitter Head Placement

The emitter head is factory-glued beside the receiver tube and emits at a +/- 45° angle that resists ambient light interference. Low current drive keeps power consumption minimal while maintaining a long launch distance. Installers must keep the head uncovered; covering it will make the controlled device unresponsive to the remote.

Upgrades Short or Fixed-Length IR Cables in Custom

This extension replaces shorter or fixed-length cables when the IR forwarding unit must sit farther from the controlled equipment. The 9.8ft length suits whole-room or cabinet-to-cabinet runs where the stock cable cannot reach. It is not suited for installations that require multiple emitter heads or a different jack size.

Highlights

  • Controls devices up to 18 m away with 3.5 mm plug
  • +/- 45° emission angle resists ambient light interference
  • 8 ft cable reaches hidden or distant equipment
  • Works with 38–56 kHz IR remotes and IR input ports
  • Low current draw extends range while keeping power use minimal

Specifications

BrandUnique Bargains
TypeExtension Cables

Questions about this item

What IR carrier frequencies does the 3.5 mm jack support?

The cable works with 38 to 56 kHz IR remote controls and devices that have an IR input port.

How much clearance does the 45 ° emission angle require in front of the emitter head?

The head emits within a +/- 45 ° cone; keep that area unobstructed so the signal reaches the target device.

Where should the red emitter head be placed during installation?

Stick the head over the controlled device's dark red translucent panel or marked IR window; covering the glued receiver tube makes the remote unresponsive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.