We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 1.5 m IR emitter cables with 3.5 mm plugs and angled red heads

Unique-Bargains

Unique-Bargains IR Emitter Extension Cable 1.5m 45° 3.5mm 2pcs

SKU CH-X53A-EVPC5

A pair of 1.5 m infrared emitter cables with 3.5 mm jacks, ±45° emission angle and 10–18 m range for 38–56 kHz remote systems

  • TypeExtension Cables
  • Controls devices up to 18 m away with a 45° emission angle
  • Works with any 38–56 kHz IR remote and IR input port
  • Low current draw extends battery life in forwarding equipment
  • 5 m cable and 3.5 mm jack reach hidden AV gear easily
  • Two cables included for multi-room or backup installations

IR emitter extension kit for remote control relay

This pair of 1.5 metre cables connects an IR distribution device to equipment hidden behind cabinet doors or in a rack. Each lead ends in a 3.5 mm mono jack and a single red emitter head with a ±45° emission angle. The kit suits installers and home users who need to relay 38–56 kHz remote signals over distance.

Dual cables and fixed 45° angle simplify placement

Two cables let you serve two zones or two components from one IR output without extra splitters. The ±45° emission angle gives a defined forward lobe that resists ambient light interference while still allowing off-axis mounting. Low current draw means the host device’s IR port powers both emitters without an external supply.

Covers 10 to 18 metres line of sight per emitter

Each head reliably reaches 10–18 metres (33–59 feet) in typical indoor conditions, enough for most living-room or boardroom runs. Beyond that range or when the emitter head is obscured by the receiver window sensitivity drops sharply. The 1.5 metre lead length limits how far the emitter can sit from the distribution block, so very long cable runs need a different solution.

Highlights

  • Controls devices up to 18 m away with a 45° emission angle
  • Works with any 38–56 kHz IR remote and IR input port
  • Low current draw extends battery life in forwarding equipment
  • 5 m cable and 3.5 mm jack reach hidden AV gear easily
  • Two cables included for multi-room or backup installations

Specifications

BrandUnique Bargains
TypeExtension Cables

Questions about this item

Will the IR emitter head need replacement if the adhesive fails?

The emitter head is glued beside the receiver tube; if the bond fails you must re-secure it so the head stays uncovered and aligned with the target device.

What is the maximum reliable control distance?

The cable supports a detecting distance of 10 to 18 metres (33 to 59 feet) when used with 38 to 56 kHz IR remotes.

Does the cable draw noticeable power during all-day use?

It is designed for low current drive and low power consumption, so continuous operation adds negligible load to the IR forwarding device.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.