We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Set of five black IEC C14 inlets with rocker switches and fuse holders

Unique-Bargains

Unique-Bargains IEC320 C14 Inlet 10A 250VAC Rocker Switch Fuse Holder 5pcs

SKU CH-0P6J-N9J0X

IEC320 C14 inlet with integrated rocker switch and fuse holder, rated 10A 250VAC, screw-mount 58 x 49 x 21 mm, pack of five

  • TypeStraight Blade
  • IEC320 C14 inlet rated 10 A 250 V AC
  • Built-in rocker switch with latching SPST action
  • Integrated fuse holder accepts fast 5 A 250 V glass fuse
  • Screw-mount design with 5 mm holes at 4 cm centres
  • Pack of five inlets, switches, fuse holders and fuses included

IEC320 C14 inlet with integrated switch and fuse

This five-piece kit combines a C14 inlet, a latching SPST rocker switch and a fuse holder rated for fast 5A 250V glass fuses. It is aimed at builders wiring CNC controller boxes or similar AC-powered enclosures who want a single panel-mount assembly.

Screw-mount panel cutout and AC load ratings

Each unit mounts through a 5mm hole with a 4cm centre distance and measures 58 x 49 x 21mm overall. The switch carries 10A 250VAC resistive, 3.5A inductive, 1.8A lamp, 2A motor and 1.8A capacitive loads, while DC use is limited to 0.5A.

Sustained operation within published limits

Under continuous load the assembly stays within the stated AC ratings provided the correct fast 5A 250V fuse is fitted. Exceeding the resistive, inductive or motor figures, or running more than 0.5A DC, moves the device outside its tested envelope.

Highlights

  • IEC320 C14 inlet rated 10 A 250 V AC
  • Built-in rocker switch with latching SPST action
  • Integrated fuse holder accepts fast 5 A 250 V glass fuse
  • Screw-mount design with 5 mm holes at 4 cm centres
  • Pack of five inlets, switches, fuse holders and fuses included

Specifications

BrandUnique Bargains
TypeStraight Blade

Questions about this item

How do I mount the IEC320 C14 inlet with its screw-type flange?

Drill two 5 mm holes spaced 4 cm centre-to-centre, then fasten the supplied screws through the flange. The step often missed is fitting the fast 5A 250V glass fuse into the holder before wiring the three terminals.

Which consumable will need replacing and what rating must it carry?

The integrated fuse holder accepts only a fast-acting 5A 250V glass fuse; a blown fuse is the only part that requires periodic replacement.

What load limit appears first when the switch runs continuously?

The rocker switch is rated for 10A resistive AC, but inductive loads are limited to 3.5A, lamp loads to 1.8A, motor loads to 2A and capacitive loads to 1.8A, so the inductive rating typically governs sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.