We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black square plastic blower fans 50x50x15mm with 18cm wires

Unique-Bargains

Unique-Bargains DC 24V 2-Wire Blower Fan 50x50x15mm Black 2Pcs

SKU CH-3MGF-9M245

Two 50×50×15 mm 24 V blower fans with 2-wire connectors and 18 cm cables exhaust or intake case air

  • DC 24 V operation powers the blower directly from a 24 V rail
  • 50 × 50 × 15 mm footprint fits tight chassis spaces
  • 57 mm hole spacing matches standard mounting patterns
  • 18 cm two-wire lead reaches nearby headers without extensions
  • Two fans per pack lets you set up intake and exhaust together

Compact 24 V Blower for Tight Cases

This 50 mm by 50 mm by 15 mm brushless fan runs on 24 V DC through a two-wire lead. The 18 cm cable reaches nearby headers and the 57 mm hole spacing matches standard mounting points. Two black plastic units are supplied in the pack. ||

Fixed-Speed Cooling for 24 V Systems

Suits builders who need a simple exhaust or intake blower on a 24 V rail and can accept constant full-speed operation. Buyers who require variable speed control or a different supply voltage should look elsewhere. ||

Two-Wire 24 V Power Interface

The fan connects with a two-wire 24 V DC input and has no PWM or tachometer signal. Verify that your power source delivers 24 V and that a two-pin connection is acceptable before purchase.

Highlights

  • DC 24 V operation powers the blower directly from a 24 V rail
  • 50 × 50 × 15 mm footprint fits tight chassis spaces
  • 57 mm hole spacing matches standard mounting patterns
  • 18 cm two-wire lead reaches nearby headers without extensions
  • Two fans per pack lets you set up intake and exhaust together

Specifications

BrandUnique Bargains

Questions about this item

Does this 24 V blower fan need a motherboard header or a separate 24 V power source?

It uses a bare 2-wire lead, so you must supply 24 V DC from a compatible PSU or controller; no standard motherboard fan header provides that voltage.

Will the 57 mm hole spacing line up with the fan mounts on my older chassis?

The fan body measures 50 × 50 mm with mounting holes on 57 mm centres; check your case or heatsink for that exact spacing before fitting.

How can I confirm the 18 cm cable is delivering 24 V to the motor after installation?

With the system powered, measure 24 V across the two wires at the fan connector; the blower should spin immediately and move air through its 15 mm thick frame.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.