We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains CW1B-06A-L 6A 115/250V EMI Filter Surge Protector

SKU CH-5BRH-409PV

Single-phase AC line filter rated 6 A at 115/250 V, 50/60 Hz, with 4 mm mounting holes on 1.6 in centres

  • TypeFilters
  • Rated for 115/250 V AC operation at 6 A
  • Suppresses EMI noise on single-phase power lines
  • Compact 4.4 × 2.9 × 2.2 cm chassis fits tight spaces
  • Mounting holes spaced 1.6 in apart with 0.16 in diameter

AC 115/250V 6A EMI filter for small electronics

The Unique-Bargains CW1B-06A-L is a single-phase AC power line filter rated for 6A at 115/250V and 50/60Hz. It suppresses conducted electromagnetic interference on the mains supply. The compact 4.4 x 2.9 x 2.2cm chassis mounts via 4mm holes on 4cm centres. It suits small electronic equipment and measuring instruments needing cleaner power.

Replaces a missing or failed line filter

Install this unit when equipment shows susceptibility to mains-borne noise or must meet conducted-emission limits. The 6A rating limits use to loads below that threshold; higher-current appliances need a larger filter. No integrated surge-protection components are specified, so separate transient protection is required where lightning or switching spikes occur.

Highlights

  • Rated for 115/250 V AC operation at 6 A
  • Suppresses EMI noise on single-phase power lines
  • Compact 4.4 × 2.9 × 2.2 cm chassis fits tight spaces
  • Mounting holes spaced 1.6 in apart with 0.16 in diameter

Specifications

BrandUnique Bargains
TypeFilters

Questions about this item

What mounting-hole spacing and screw diameter does the CW1B-06A-L require?

The filter needs two holes spaced 1.6 in (4 cm) apart, each 0.16 in (4 mm) in diameter for M4 hardware.

Which wiring step is most often missed when installing this 6 A EMI filter?

Connecting the earth/ground terminal to chassis ground; omitting it leaves the filter ineffective against common-mode noise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.