We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains Aluminum Radial Electrolytic Capacitor 6.8uF 400V 105C 10x13mm 10pcs

SKU CH-DJ6W-494H0

Pack of 10 radial aluminium electrolytic capacitors rated 6.8 µF at 400 V, 105 °C, 3000-hour life, 10 × 13 mm body, 5 mm pitch

  • Featuresold TV capacitor replacement;capacitors DIY project for TV;f
  • Handles high ripple current with low impedance
  • Rated for 400 V at 105 °C operating temperature
  • 3000-hour load life at maximum rated conditions
  • Radial leads with 5 mm pitch for standard PCB mounting
  • Pack of ten 6.8 µF capacitors in 10 × 13 mm case

Replacement Capacitors for TV and Appliance Repair

This pack contains ten aluminum radial electrolytic capacitors rated at 6.8 microfarads and four hundred volts with a one hundred five degree Celsius temperature rating. They are intended for DIY soldering work on CCU circuit boards in televisions, washing machines and similar equipment where the original component has failed.

Verify Specifications Before Soldering

Confirm that the faulty capacitor on your board matches the six point eight microfarad capacitance and does not exceed the four hundred volt rating. Check that the ten by thirteen millimetre body and five millimetre lead pitch will fit the available space and hole spacing. Polarity is critical: the longer lead is positive and the shorter lead is negative.

Direct Swap for Aged Through-Hole Parts

These capacitors replace original through-hole electrolytics that have dried out or bulged after thousands of hours of service. The three thousand hour load-life rating at one hundred five degrees Celsius and low impedance design suit high ripple current positions in switch-mode power supplies. They are not suitable for surface-mount pads, higher voltage rails or applications requiring a different capacitance value.

Highlights

  • Handles high ripple current with low impedance
  • Rated for 400 V at 105 °C operating temperature
  • 3000-hour load life at maximum rated conditions
  • Radial leads with 5 mm pitch for standard PCB mounting
  • Pack of ten 6.8 µF capacitors in 10 × 13 mm case

Specifications

BrandUnique Bargains
Featuresold TV capacitor replacement;capacitors DIY project for TV;for washing machine television repairman tool;fix CCU circuit board soldering;soldering and reassembling a TV

Questions about this item

Does the pack contain ten loose capacitors or are any accessories included?

The package contains ten radial-lead aluminum electrolytic capacitors and nothing else; no mounting hardware, solder or tools are supplied.

Should I pick the 6.8 µF 400 V version or would a different capacitance or voltage be better for my repair?

Choose this exact 6.8 µF 400 V rating; the supplier notes capacitance must not be changed and voltage can be higher but never lower than the original part.

What does the 3000-hour load-life rating mean when the capacitor is running at 105 °C inside a TV power supply?

It indicates the component is rated to survive 3000 hours of continuous operation at its maximum 105 °C temperature with rated ripple current applied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.