We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 8 Pcs Rubber Feet D45xH15mm Anti-Vibration Base Pad Stand

SKU CH-610T-EXXEM

Set of eight synthetic rubber feet measuring 45 mm diameter by 15 mm height with 5 mm and 14 mm mounting holes to isolate speakers, amplifiers or subwoofers from floor vibrations

  • Isolates speaker vibrations from hard floors for tighter bass
  • Synthetic rubber resists aging and corrosion for long-term stability
  • 15 mm height and 45 mm diameter suit HiFi speakers and amps
  • 5 mm and 14 mm holes simplify driver mounting
  • Pack of eight covers a full stereo or multi-channel setup

Vibration isolation for HiFi speakers and amplifiers

This pack contains eight rubber feet designed to decouple HiFi speakers, amplifiers and car subwoofers from hard flooring. Synthetic rubber construction provides high elasticity plus resistance to ageing and corrosion. Each foot measures 45 mm in diameter and 15 mm tall with a 14 mm large hole and 5 mm small hole for bolt-through mounting.

Bolt-through mounting with 14 mm large hole

The single specification that decides fit is the 14 mm large hole diameter paired with a 5 mm small hole. Installers must drill matching holes in the speaker cabinet and insert T-nuts before securing each foot. If the cabinet cannot accommodate a 14 mm clearance hole the feet will not mount.

Eight feet support typical stereo pairs

Eight pieces cover four corners on two speaker cabinets or a single subwoofer enclosure with room to spare. The 15 mm height lifts cabinets enough to reduce floor-borne vibration on hard surfaces. Very heavy cabinets or installations requiring more than four isolation points per box will need additional packs.

Highlights

  • Isolates speaker vibrations from hard floors for tighter bass
  • Synthetic rubber resists aging and corrosion for long-term stability
  • 15 mm height and 45 mm diameter suit HiFi speakers and amps
  • 5 mm and 14 mm holes simplify driver mounting
  • Pack of eight covers a full stereo or multi-channel setup

Specifications

BrandUnique Bargains

Questions about this item

How much vibration isolation do the 45 mm diameter pads actually give on a hard floor?

The 45 mm synthetic rubber feet decouple speakers from hard flooring, reducing transmitted vibration that can blur bass response.

What does the 14 mm large hole diameter allow when mounting?

The 14 mm hole accepts a T-nut or bolt for secure fixing through the speaker cabinet.

Will the 15 mm height and 45 mm footprint fit under my amplifier without raising it too high?

At 15 mm tall and 45 mm wide each, the pads add minimal height while spreading the load across a stable base.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.