Unique-Bargains
Unique-Bargains 10pcs DC Power 3.5mm x 1.35mm 1A 30cm Barrel Male Plug Connector Pigtail
Ten 30 cm barrel plug pigtails with 3.5 mm × 1.35 mm connectors rated at 1 A for LED or monitoring power feeds
- TypePower
- Ready-to-use pigtails for fast DC hook-up
- Ten-piece pack covers multiple devices or spares
- 5 mm × 1.35 mm barrel fits compatible gear
- Pure copper cores deliver strong conductivity
- 30 cm leads suit LED strips and monitors
Ten-piece barrel plug set
This pack contains ten DC power pigtails each fitted with a 3.5mm x 1.35mm male barrel connector. The leads are 30cm long and rated for 1A current. Pure copper wire cores provide strong electrical conductivity for reliable power delivery. They are intended for connecting LED equipment or monitoring high-power supplies.
Suits low-current DC devices
Builders wiring LED strips, small monitors or similar 1A gear will find the uniform length and connector size convenient. The fixed 3.5mm outer diameter and 1.35mm centre pin mean the plugs only fit sockets with that exact profile. Buyers who need a different barrel size, higher current rating or longer reach should look at other cable options.
Ready for direct soldering
Each pigtail ends in bare wires so it can be soldered or crimped into a custom harness without an extra connector step. The 30cm length keeps cable runs short inside enclosures, reducing clutter and voltage drop. No additional adapters are included, so the installer must provide any mating barrel jack or terminal block required by the target device.
Highlights
- Ready-to-use pigtails for fast DC hook-up
- Ten-piece pack covers multiple devices or spares
- 5 mm × 1.35 mm barrel fits compatible gear
- Pure copper cores deliver strong conductivity
- 30 cm leads suit LED strips and monitors
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Power |
Questions about this item
What device needs a 3.5 mm x 1.35 mm DC jack for these 10 pigtails to connect?
Any equipment with a matching 3.5 mm x 1.35 mm barrel socket — such as an LED driver or monitor supply — will accept the male plug directly.
Can I use these 30 cm leads with an existing power brick that already has a 3.5 mm x 1.35 mm output?
Yes, the male barrel plugs fit that same 3.5 mm x 1.35 mm interface, extending the reach by 30 cm while carrying up to 1 A.
How do I confirm each of the 10 pigtails is conducting correctly after wiring?
Apply power and measure continuity or voltage at the stripped ends; the pure-copper cores should show low resistance and deliver the expected 1 A rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



