We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two golden aluminum chassis-mount resistors with cooling grooves and screw terminals

Unique-Bargains

Unique-Bargains 100W 60 Ohm Aluminum Resistor 2 Pack Golden

SKU CH-AKGD-HTWFS

Two chassis-mounted 100 W 60 Ω aluminum wire-wound resistors with cooling grooves, 5 % tolerance and screw tabs on 44 mm centres

  • 100 W power handling for high-load circuits
  • 60 Ω resistance with 5 % tolerance for precise current control
  • Aluminium housing with cooling grooves improves thermal dissipation
  • Chassis-mount design with 44 mm hole spacing enables secure installation
  • Pack of two resistors simplifies multi-point or replacement needs

100 W 60 Ω chassis-mount resistors

This two-pack supplies aluminium-housed wire-wound resistors rated at 100 W and 60 Ω with a 5 % tolerance. The golden anodised bodies measure 85 x 21 x 16 mm and include 3.4 mm mounting holes spaced 44 mm apart for direct chassis attachment.

Suits industrial power and audio loads

Engineers building frequency converters, inverters, lighting ballasts or audio crossovers will value the cooling grooves and high overload capacity. Buyers needing surface-mount parts, lower power ratings or different resistance values should look elsewhere.

Fits screw-down plates and frees board space

Each unit mounts on a cooling plate using standard screws through the 3.4 mm holes, with 13 mm rods for wire termination. The compact 60 mm board length leaves room for adjacent components while the aluminium housing handles heat without extra heatsinks.

Highlights

  • 100 W power handling for high-load circuits
  • 60 Ω resistance with 5 % tolerance for precise current control
  • Aluminium housing with cooling grooves improves thermal dissipation
  • Chassis-mount design with 44 mm hole spacing enables secure installation
  • Pack of two resistors simplifies multi-point or replacement needs

Specifications

BrandUnique Bargains

Questions about this item

What screw size fits the 3.4mm mounting holes on these 100W 60 ohm resistors?

Use M3 screws for the 3.4mm diameter mounting holes spaced 44mm apart to chassis-mount each aluminum resistor securely.

Will these 85mm long aluminum-housed resistors fit beside legacy components on a crowded board?

Each unit measures 85 x 21 x 16mm with a 60mm board length, so verify clearance against nearby parts before mounting the pair.

How can I confirm the 60 ohm value after installing the wirewound resistors?

Disconnect power, isolate the resistor from the circuit, then measure resistance across the terminal rods with a calibrated multimeter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.