Unique-Bargains
Unique-Bargains 10" 147N/33lbs Gas Strut Red
A 10-inch gas strut rated at 33 lbs force with adjustable soft-close speed for lids, hatches and RV compartments
- Holds 33 lbs per strut with 147 N force
- Extends to 10 inches and compresses to 6.3 inches
- Adjustable soft-close speed for smooth lid operation
- Operates reliably from -25 °C to 70 °C
- Includes mounting brackets and screws for quick installation
10 inch 147N gas strut
This 10 inch gas strut delivers 147 newtons of force, equivalent to 33 lbs per unit, to hold open lids, hatches or windows on cars, RVs, campers and cabinets. The red metal housing contains a 15 mm diameter cylinder with a 6 mm connecting rod that extends to a 26 cm centre-to-centre length and compresses to 16 cm. Installation uses the supplied brackets and screws with basic hand tools.
Universal lift support for moderate weights
Suits owners who need a single strut to support panels up to 33 lbs in temperatures from minus 25 to 70 degrees Celsius. Not suited for heavier doors, dual-strut setups or applications requiring a different mounting hole pattern than the 10 by 6 mm slots provided. Buyers needing adjustable force or stainless construction should look elsewhere.
Fits 10 by 6 mm mounting holes
The kit includes one strut, two brackets and five 3 mm screws that thread into the 10 mm by 6 mm installation holes on the host panel. Total strut length is 27.5 cm with a 9.2 cm rod stroke, freeing interior space when the lid is closed. No special tools or external power are required for the self-contained gas spring.
Highlights
- Holds 33 lbs per strut with 147 N force
- Extends to 10 inches and compresses to 6.3 inches
- Adjustable soft-close speed for smooth lid operation
- Operates reliably from -25 °C to 70 °C
- Includes mounting brackets and screws for quick installation
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What mounting hardware do I need to install the 10 mm by 6 mm brackets included with the strut?
The package supplies two brackets, five 3 mm diameter screws and basic hand tools; you only need a screwdriver or drill bit that fits the 3 mm screws to secure the brackets to your lid or frame.
Can the 147 N gas strut replace a weaker original lift support on my RV cabinet without changing the hinge points?
Yes, the 26 cm extended and 16 cm compressed centre-to-centre lengths match many standard mounts, and the 10 mm by 6 mm hole pattern fits existing brackets, so you can swap it directly if those dimensions match your current hardware.
How do I verify the strut is operating correctly after fitting it?
Open the lid fully — it should stay at the 26 cm extended position without drifting — then close it; the soft-close speed can be tuned, and movement should be smooth from -25 °C to 70 °C.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



