We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white USB 3.2 to RJ45 network adapter with USB-A and Type-C plugs

ULANSeN UC57 5Gbps USB 3.2 Ethernet Adapter RTL8157

SKU CH-P1TR-QDNQE

Connects USB 3.2 ports to 5Gbps Ethernet using Realtek RTL8157, supporting 2.5Gbps and 1Gbps fallback speeds

  • Weight0.06 kilograms
  • Up to 5 Gbps network speed via USB 3.2
  • Backward compatible with 10, 100, 1000 and 2500 Mbps networks
  • Realtek RTL8157 chipset supports IEEE 802.3bz standard
  • Works with Windows 10, 11, Linux and macOS 10.7+
  • Lightweight 0.06 kg design with advanced heat dissipation

Ultra-fast 5 Gbps USB 3.2 Ethernet Adapter

The ULANSeN UC57 adds a 5 Gbps RJ45 port to laptops, desktops and workstations through a single USB 3.2 connection. It targets users who need wired throughput beyond 1 Gbps for large file transfers, video conferencing or media streaming. The adapter uses the Realtek RTL8157 controller and supports Windows 10, Windows 11, Linux and macOS 10.7 or later.

Low-power RTL8157 controller runs cool and quiet

The RTL8157 chipset integrates advanced power management so the adapter draws minimal current and produces no audible noise during normal operation. No fan or active cooling is required; the lightweight aluminium housing dissipates heat passively. Performance scales with the host port: USB 3.2 Gen 2 delivers full 5 Gbps, while USB 3.0 or 2.0 limits throughput to their respective maximums.

Dual USB-A and USB-C connector fits modern

A removable 2-in-1 plug lets you insert the adapter into either a USB-A or USB-C socket without a separate dongle. The package includes the adapter only; a CAT6A or higher Ethernet cable and a USB 3.2 Gen 2 host port are needed to reach 5 Gbps. Driver installation is required on Windows and Linux; macOS 10.7+ supports the device natively.

Highlights

  • Up to 5 Gbps network speed via USB 3.2
  • Backward compatible with 10, 100, 1000 and 2500 Mbps networks
  • Realtek RTL8157 chipset supports IEEE 802.3bz standard
  • Works with Windows 10, 11, Linux and macOS 10.7+
  • Lightweight 0.06 kg design with advanced heat dissipation

Specifications

BrandULANSeN
ModelUC57
Weight0.06 kilograms

Questions about this item

How do I install the UC57 adapter and which port mistake limits speed?

Plug the USB 3.2 connector into a USB 3.2 or higher port on the host; using a USB 2.0 or 3.0 port caps the link at lower rates and prevents the advertised 5000 Mbps throughput.

What ongoing maintenance or replacement does the UC57 need?

No scheduled maintenance is required; keep the driver updated for Windows 11, Linux or macOS 10.7 and later, and replace the CAT6A or higher cable only if it becomes damaged.

What limit appears first during sustained heavy transfers on the UC57?

The 5000 Mbps ceiling of the RTL8157 chipset and the USB 3.2 Gen2 interface is the first hard bound; thermal throttling may engage after prolonged maximum load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.