UK Pro
UK Pro 22109 Safety Yellow LED Industrial Handheld Flashlight 125 Lumens Light Kit
Industrial safety-rated LED flashlight delivers 125 lumens for 32 hours on alkaline C cells in a 7.5-inch yellow plastic body
- 125-lumen output for clear task visibility
- 32-hour runtime on alkaline C cells for extended shifts
- Class I Div. 1 Groups C-G T4 rating for hazardous-location safety
- Safety-yellow plastic body for high visibility in low light
- Compact 7.5-inch length fits tool belts and glove boxes
Industrial Handheld Light Kit
The UK Pro 22109 is a safety-yellow handheld flashlight built for industrial environments. It delivers 125 lumens of LED output and runs on standard C-size alkaline batteries. The light carries a Class I, Division 1 rating for Groups C, D, E, F, and G T4 hazardous locations. It suits workers who need a certified, non-rechargeable hand light for daily inspection tasks.
Thermals Noise and Power
Alkaline battery operation means there is no charging circuit to generate heat during use. The plastic body remains cool to the touch over the full 32-hour high-setting runtime. Silent solid-state LED emission produces no fan or coil whine in quiet plant areas. Power draw is limited to the installed C cells with no external supply required.
Build Quality and Connectors
The 7.5-inch by 1.9-inch plastic housing resists impacts and chemical exposure common in industrial settings. Bright yellow colour aids quick visual location in low-light or cluttered workspaces. A simple twist-head or switch interface allows gloved operation without menus or modes. No charging port or cable management is needed, reducing failure points for field crews.
Highlights
- 125-lumen output for clear task visibility
- 32-hour runtime on alkaline C cells for extended shifts
- Class I Div. 1 Groups C-G T4 rating for hazardous-location safety
- Safety-yellow plastic body for high visibility in low light
- Compact 7.5-inch length fits tool belts and glove boxes
Specifications
| Brand | UNDERWATER KINETICS |
|---|
Questions about this item
How do I install the C alkaline batteries in the 22109 flashlight, and what step do people often miss?
Unscrew the tail cap, insert the C cells with the positive ends toward the head, then tighten the cap fully so the O-ring seals — skipping the seal check is the common mistake.
What maintenance or replacement will the 22109 need over time?
Replace the C alkaline cells after roughly 32 hours of high-output use and inspect the yellow plastic body and lens for cracks before each shift.
What limit appears first during sustained use of the 22109?
The 125 lumen output will gradually dim as the alkaline cells deplete, typically after the rated 32 hour high-setting runtime.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



