We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rackmount switch with 24 RJ45 ports and 4 SFP+ cages

Ubiquiti Networks

Ubiquiti Networks USW-Pro-HD-24-PoE 24-port Layer 3 PoE++ network switch

SKU CH-MJH4-J6ZY8 MPN USW-Pro-HD-24-PoE

Managed 24-port Layer 3 switch with 22× 2.5 GbE and 2× 10 GbE PoE++ ports plus 4× 10G SFP+ uplinks, 600 W PoE budget and Etherlighting port identification

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 4 x SFP+
  • MAC Address Table128
  • IPv4 Features128
  • PoEYes

Model USW-Pro-HD-24-PoE

  • Layer 3 routing with static routes and DHCP services
  • 600 W PoE++ budget across 24 RJ45 ports
  • Etherlighting LEDs show port speed and VLAN status
  • 2 x 10 GbE and 22 x 2.5 GbE downlink speeds
  • Four 10 GbE SFP+ uplinks for high-speed backbone

Professional Layer 3 Switch

The Ubiquiti Networks USW-Pro-HD-24-PoE is a rackmount managed switch that provides 24 PoE++ RJ45 ports and four 10G SFP+ uplinks. It delivers Layer 3 routing with DHCP server, relay, inter-VLAN routing and static routing for local networks. The 600 W PoE budget powers demanding endpoints across all RJ45 ports.

Suited for high-density PoE deployments

This switch fits networks that need 2.5 GbE and 10 GbE downlink speeds alongside advanced Layer 2 features such as LACP, STP, RSTP, QoS, IGMP snooping and 802.1X control. Pro AV profiles accelerate Dante, NDI, SDVoE and similar workflows. Buyers without PoE++ requirements or who need only Layer 2 switching should consider alternatives.

Capacity and headroom

Twenty-two ports run at 2.5 GbE PoE++ and two ports at 10 GbE PoE++, sharing a 600 W budget that supports high-power cameras, access points and AV gear. Four 10G SFP+ uplinks handle aggregation traffic. The switch consumes 60 W without PoE load and 660 W at full output.

Highlights

  • Layer 3 routing with static routes and DHCP services
  • 600 W PoE++ budget across 24 RJ45 ports
  • Etherlighting LEDs show port speed and VLAN status
  • 2 x 10 GbE and 22 x 2.5 GbE downlink speeds
  • Four 10 GbE SFP+ uplinks for high-speed backbone

Specifications

BrandUbiquiti Networks
ModelPro HD 24 PoE
Part NumberUSW-Pro-HD-24-PoE
FormatRackmount
Network Management TypeManaged
Primary Ports24 x RJ45 + 4 x SFP+
MAC Address Table128
IPv4 Features128
PoEYes
Layer3
Layer 2 FeaturesLACP Port Aggregation
STP & RSTP
QoS (DSCP)
Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron)
Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
IGMP Snooping
802.1X Control
MAC-Based ACLs & Device Isolation
DHCP Snooping & Guarding
Egress Rate Limit
Flow Control
Storm Control
Multicast & Broadcast Rate Limiting
MAC Address Blocking
IP-Based ACLs & Network Isolation
MAC-Based Port Restriction
Port Isolation
Port Mirroring
Jumbo Frames
LLDP-MED
Voice VLAN
Loop Protection
Layer 3 FeaturesDHCP Server (Local Networks)
DHCP Relay
Inter-VLAN Routing (Local Networks)
Static Routing (Local Networks)
PoE Ports24 x PoE++
PoE Power Budget600W
Power100~240VAC, 50/60Hz
Max Power Consumption60W (Excluding PoE Output)
660W (Including PoE Output)
Dimensions442 x 400 x 44 mm
(17.4 x 15.7 x 1.7")
WeightWithout mounting brackets: 6.2 kg (13.7 lb)
With mounting brackets: 6.3 kg (13.9 lb)
Shipping weight7.67 kg
Package size533 × 516 × 122 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this switch need a separate router to handle DHCP and inter-VLAN routing for my network?

No, the switch includes a built-in DHCP server, DHCP relay, and static routing for local networks, so it can provide Layer 3 services without an external router.

Will my existing 1 GbE access points and cameras work on the 2.5 GbE PoE++ downlink ports?

Yes, the 22 downlink ports auto-negotiate down to 1 GbE and deliver up to PoE++ power, so legacy devices connect and receive power without configuration changes.

How can I confirm the switch is forwarding traffic at 10 Gbps on the uplinks after installation?

The Etherlighting LEDs on the two 10 GbE uplink ports illuminate to show link speed and activity, giving immediate visual confirmation of 10 Gbps operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.