We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ubiquiti Networks

Ubiquiti Networks USW-Pro-HD-24 24-port network switch

SKU CH-5KP5-YV7F0 MPN USW-Pro-HD-24

A 24-port rack-mount Layer 3 switch with 22 2.5 GbE RJ45, 2 10 GbE RJ45 and 4 10G SFP+ ports plus Etherlighting port illumination

  • FormatRack mount (1U)
  • Primary Ports2.5 GbE RJ45: 22 (2.5G/1G/100M/10M) 10 GbE RJ45 2: (10G/5G/2
  • PoEYes
  • Layer3
  • Dimensions442 x 285 x 44 mm (17.4 x 11.2 x 1.7")
  • WeightWithout mounting brackets: 4.2 kg (9.2 lb) With mounting bra

Model USW-Pro-HD-24

  • Layer 3 routing simplifies network segmentation and traffic control
  • 22 multi-gigabit RJ45 ports at 2.5 GbE connect dense workstations
  • Two 10 GbE RJ45 uplinks deliver high-speed backbone throughput
  • Four 10G SFP+ ports enable flexible fibre or copper uplinks
  • Etherlighting LEDs identify port speed, link status and VLAN at a glance

24-port Layer 3 switch

The Ubiquiti USW-Pro-HD-24 is a 1U rack-mount Layer 3 switch with 22 RJ45 ports at 2.5 GbE, two RJ45 ports at 10 GbE and four 10G SFP+ uplinks. It runs without PoE and includes mounting accessories for standard rack installation. The chassis measures 442 x 285 x 44 mm and weighs 4.2 kg without brackets.

Networks needing multi-gigabit density without PoE

This switch suits administrators who want high-density 2.5 GbE and 10 GbE connectivity in a single rack unit but do not require Power over Ethernet for access points or cameras. Buyers who need PoE++ power delivery for attached devices should consider a PoE-enabled model instead. The Layer 3 feature set supports routing between VLANs and advanced traffic management.

22 ports at 2.5 GbE plus two 10 GbE RJ45

The port mix is the deciding specification: 22 multi-gigabit RJ45 downlinks at 2.5 GbE, two 10 GbE RJ45 ports and four 10G SFP+ uplinks provide a fixed 24-port RJ45 count with dedicated high-speed fibre uplinks. This configuration determines whether the switch matches the required device density and uplink strategy for the network segment.

Highlights

  • Layer 3 routing simplifies network segmentation and traffic control
  • 22 multi-gigabit RJ45 ports at 2.5 GbE connect dense workstations
  • Two 10 GbE RJ45 uplinks deliver high-speed backbone throughput
  • Four 10G SFP+ ports enable flexible fibre or copper uplinks
  • Etherlighting LEDs identify port speed, link status and VLAN at a glance

Specifications

FormatRack mount (1U)
Primary Ports2.5 GbE RJ45: 22 (2.5G/1G/100M/10M)
10 GbE RJ45 2: (10G/5G/2.5G/1G/100M)
10G SFP+: 4 (10G/1G)
PoEYes
Layer3
Dimensions442 x 285 x 44 mm
(17.4 x 11.2 x 1.7")
WeightWithout mounting brackets: 4.2 kg (9.2 lb)
With mounting brackets: 4.3 kg (9.4 lb)
Shipping weight6.49 kg
Package size442 × 399 × 43 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the switch is operating correctly after installation?

Check the Etherlighting LEDs on each port — they show link status, speed and native VLAN so you can verify every connection at a glance.

What ships with the USW-Pro-HD-24 and what must I purchase separately?

The box contains the switch and mounting accessories; SFP+ transceivers, rack rails and any UniFi Power Backup unit are sold separately.

Should I choose the Pro HD 24 PoE or the non-PoE Pro HD 24 for my deployment?

Pick the Pro HD 24 PoE if you need up to 600 W of PoE++ power for access points or cameras; choose the non-PoE model when only data switching is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.