We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount switch with eight SFP+ cages and status LEDs

Ubiquiti Networks

Ubiquiti Networks USW-Aggregation 8-Port 10G SFP+ Layer 2 Switch

SKU CH-MJ4D-2D7W6

An 8-port managed Layer 2 switch with 10G SFP+ ports, 80 Gbps throughput, fanless cooling and 30 W max power draw

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports8 x SFP+
  • Primary Port SpeedTotal non-blocking throughput 80 Gbps Switching capacity 160
  • Primary Port Type(8) 10G SFP+ ports
  • Management InterfaceEthernet In-Band

Model Aggregation

  • 80 Gbps non-blocking throughput handles heavy traffic loads
  • 160 Gbps switching capacity supports full wire-speed forwarding
  • 8 SFP+ ports deliver 10 Gbps connectivity each
  • Fanless design provides completely silent operation
  • 30 W maximum power draw keeps energy costs low

Eight-Port 10G Aggregation Switch

The USW-Aggregation is an eight-port, Layer 2 managed switch built for 10G SFP+ connectivity. It delivers a total non-blocking throughput of 80 Gbps with a switching capacity of 160 Gbps and a forwarding rate of 119.04 Mpps. The fanless design ensures silent operation in rackmount environments.

SFP+ Interface Constraints

All eight ports use the SFP+ form factor, so compatible transceivers or direct-attach cables must be sourced separately for each link. The switch provides 30 W maximum power consumption from an internal 36 W universal AC supply, leaving no PoE budget for attached devices. Management occurs in-band through the Ethernet ports.

Layer 2 Feature Set Determines Fit

This switch supports VLANs, LACP aggregation, STP and RSTP, IGMP snooping, 802.1X control, MAC and IP ACLs, DHCP snooping, port isolation, storm control and port mirroring. It does not perform Layer 3 routing, so networks requiring inter-VLAN routing need a separate router or Layer 3 device.

Highlights

  • 80 Gbps non-blocking throughput handles heavy traffic loads
  • 160 Gbps switching capacity supports full wire-speed forwarding
  • 8 SFP+ ports deliver 10 Gbps connectivity each
  • Fanless design provides completely silent operation
  • 30 W maximum power draw keeps energy costs low

Specifications

BrandUbiquiti Networks
SeriesNetwork Switch
ModelAggregation
Part NumberUSW-Aggregation
FormatRackmount
Network Management TypeManaged
Primary Ports8 x SFP+
Primary Port SpeedTotal non-blocking throughput 80 Gbps
Switching capacity 160 Gbps
Forwarding rate 119.04 Mpps
Primary Port Type(8) 10G SFP+ ports
Management InterfaceEthernet In-Band
VLAN SupportYes
Jumbo FramesYes
PoENo
Layer2
Layer 2 FeaturesLACP Port Aggregation
STP & RSTP
Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
IGMP Snooping
802.1X Control
MAC-Based ACLs & Device Isolation
DHCP Snooping & Guarding
Egress Rate Limit
Flow Control
Storm Control
Multicast & Broadcast Rate Limiting
MAC Address Blocking
IP-Based ACLs & Network Isolation
MAC-Based Port Restriction
Port Isolation
Port Mirroring
Jumbo Frames
LLDP-MED
Voice VLAN
Loop Protection
Port MirroringYes
LEDsSystem: Status
SFP+: Link/activity
ButtonFactory reset
PowerPower method Universal input, 100—240V AC, 50/60 Hz
Power supply AC/DC, internal, 36W
Max Power Consumption30W
Dimensions442 x 120 x 43.7 mm (17.4 x 4.7 x 1.7")
WeightWithout mounting brackets: 2.6 kg (5.8 lb)
With mounting brackets: 2.7 kg (6 lb)
CertificationCE, FCC, IC
System RequirementUniFi Network Version 5.14.12 and later
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Shipping weight3.40 kg
Package size559 × 241 × 122 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How many 10G SFP+ ports does the USW-Aggregation provide?

The switch has eight 10G SFP+ ports for fibre or copper modules.

What does the 80 Gbps non-blocking throughput mean for daily traffic?

All eight ports can run at full 10 Gbps simultaneously without internal congestion.

Which management interface does the switch use and what does it cap?

Management is Ethernet in-band, so configuration traffic shares the same 10G SFP+ links as data.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.