Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086429BTC
In stock
Ubiquiti Networks
Ubiquiti Networks UniFi USP-RPS Redundant Power System
Provides redundant power to six UniFi devices via DC outputs with a touchscreen display and network management
- Input Voltage Range100 - 240VAC
- Input ConnectionUniversal AC Input, 100 to 240VAC
- WattsInternal 350W AC/DC Internal 645W AC/DC
- Outlets6
- Interface PortRJ-45
- RackmountableYes
- Six USP DC ports power multiple UniFi devices simultaneously
- 3" touchscreen shows real-time status at a glance
- Universal 100-240VAC input works worldwide without adapters
- 1U rackmount kit included for quick cabinet installation
- Managed through UniFi Network Controller 5.12.11 or later
Redundant Power for UniFi Switches
The UniFi USP-RPS is a 1U rackmount battery backup designed to keep UniFi switches running during a mains failure. It accepts a universal 100 to 240VAC input and provides six USP DC output ports for direct connection to compatible switches. A 1.3 inch touchscreen shows real-time status and the unit is managed through UniFi Network Controller version 5.12.11 or later.
Suited for Managed UniFi Deployments
This system suits administrators who already run UniFi switches with USP inputs and need zero-downtime power redundancy in a single rack unit. It is not for environments that rely on standard AC UPS units, for equipment lacking USP DC ports, or for setups that cannot run the required UniFi Network Controller software.
Dual Internal Supplies Deliver 350W and 645W
Two internal AC/DC converters rated at 350W and 645W feed the six output ports, giving ample headroom for multiple switches under normal load. The combined capacity covers typical access-layer deployments, but very large PoE-heavy stacks or future high-density chassis may exceed the available DC budget.
Highlights
- Six USP DC ports power multiple UniFi devices simultaneously
- 3" touchscreen shows real-time status at a glance
- Universal 100-240VAC input works worldwide without adapters
- 1U rackmount kit included for quick cabinet installation
- Managed through UniFi Network Controller 5.12.11 or later
Specifications
| Brand | UniFi |
|---|---|
| Model | USP-RPS |
| Input Voltage Range | 100 - 240VAC |
| Input Connection | Universal AC Input, 100 to 240VAC |
| Watts | Internal 350W AC/DC Internal 645W AC/DC |
| Outlets | 6 |
| Interface Port | RJ-45 |
| Rackmountable | Yes |
| Features | (6) USP DC output ports (1) Ethernet port 1U Rackmountable (kit included) 1.3" Touchscreen display with status information Managed by UniFi Network Controller version: 5.12.11 or later |
| Dimensions | 17.42" x 12.82" x 1.72" |
| Weight | 12.13 lbs. |
| Shipping weight | 5.90 kg |
| Package size | 551 × 493 × 284 mm |
Questions about this item
Which UniFi devices can draw power from the six USP DC output ports?
The USP-RPS provides six USP DC output ports for compatible UniFi switches and access points that accept USP power input; check each device's specifications for USP compatibility.
Can the USP-RPS be managed through an existing UniFi Network Controller running version 5.12.11?
Yes, the USP-RPS requires UniFi Network Controller version 5.12.11 or later for monitoring and management via the Ethernet port.
What status information does the 1.3" touchscreen display show to confirm the USP-RPS is operating correctly?
The 1.3" touchscreen displays real-time status information including input voltage, output power draw, and system health indicators for immediate verification.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084061BTC
In stock
