We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fiber patch cable 295.3 ft with LC male connectors on both ends black jacket

Ubiquiti Networks

Ubiquiti Networks single-mode fiber patch cable 295.3 ft LC male LC male black

SKU CH-546K-YANFV

A 295.3 ft single-mode fiber patch cable with LC male connectors on both ends for network devices

  • TypeOthers
  • ColorBlack
  • Connector Number1
  • Length300 ft.
  • Single-mode 9/125 µm core for long-distance links
  • 3 ft length spans building-to-building runs
  • LC male connectors on both ends fit standard transceivers
  • Weather-proof jacket survives outdoor duct exposure
  • Lightweight flexible design eases cable tray routing

295.3 ft single-mode fiber patch cable

This 295.3 ft single-mode fiber patch cable uses a 9/125 µm core and LC male connectors on both ends. It is built for long-distance links between network devices such as switches and routers. The black jacket is lightweight, flexible and weather proof for indoor or outdoor routing.

Installing the LC connectors and pulling the cable

The LC male connectors snap into compatible ports without tools, and the flexible jacket eases pulls through conduit or tray. The 295.3 ft length is supplied as a single continuous run, so slack management and bend-radius discipline are the installer's responsibility. Single-mode fiber demands clean end-faces; dust or scratches on the ferrules will raise insertion loss.

Distance and interface limits of single-mode fiber

Single-mode fiber supports far greater reach than multimode, but the electronics at each end must match the 9/125 µm specification and the chosen wavelength. The LC interface itself does not guarantee compatibility with every transceiver form factor or speed rating. Maximum achievable distance depends on the optical budget of the connected switches or routers, not on the cable alone.

Highlights

  • Single-mode 9/125 µm core for long-distance links
  • 3 ft length spans building-to-building runs
  • LC male connectors on both ends fit standard transceivers
  • Weather-proof jacket survives outdoor duct exposure
  • Lightweight flexible design eases cable tray routing

Specifications

BrandUBIQUITI - NETWORKS
TypeOthers
ColorBlack
Connector Number1
Length300 ft.

Questions about this item

How can I confirm the patch cable is operating correctly after installation?

Verify link lights on the switch and router ports show an active single-mode connection at the expected speed and check for low insertion loss with an optical power meter.

What comes in the package and what must be sourced separately?

The box contains the 295.3 ft black single-mode fiber patch cable with LC male connectors on both ends; cleaning tools, patch panels or additional adapters are not included.

Which length should I select for a backbone run that measures about 295 feet?

Choose the 295.3 ft version; it matches the required span while keeping slack minimal for a single-mode LC-to-LC patch between distribution frames.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.