Ubiquiti Networks
Ubiquiti Networks LAP-120(US) 5 GHz 450 Mbit/s network antenna
5 GHz sector antenna covers 120° with 2×2 MIMO at 450 Mbit/s and Gigabit PoE
- TypeWireless Bridge
- SpecificationsTechnical Information: Wireless LAN Standard: IEEE 802.11ac
- Sector coverage reaches 120° with 2x2 MIMO antenna
- GPS Sync boosts network throughput by 90% for carrier-class scale
- airOS 8 adds real-time RF analytics and airMAX ac protocol
- Tool-free three-axis alignment assembles in seconds for fast deployment
- Gigabit Ethernet with PoE support simplifies single-cable installation
Ubiquiti airMAX Lite 5 GHz sector AP
The Ubiquiti Networks LAP-120(US) is a 5 GHz wireless bridge built for point-to-multipoint links. It delivers up to 450 Mbit/s throughput using 2x2 MIMO and IEEE 802.11ac. The integrated radio and sector antenna cover a 120° azimuth, serving multiple airMAX ac CPEs from a single pole-mounted unit. GPS synchronisation enables carrier-class scaling with 90% higher throughput than unsynchronised alternatives.
Thermals noise and power draw
The access point draws 24 V at .5 A through its integrated Gigabit PoE port, keeping cabling simple and power consumption low. Passive cooling handles the radio and Ethernet interface without fans, so the unit runs silently in outdoor environments. The single PoE adapter supplies both data and power over one cable, reducing the number of connections exposed to weather.
Mounting kit PoE adapter and airOS 8
The box includes a three-axis ball-joint pole mount that assembles in seconds and needs only one wrench for final tightening. A 24 V .5 A Gigabit PoE injector is bundled, so no separate power supply is required. airOS 8 adds the airMAX ac protocol, real-time RF analytics and a redesigned interface for easier configuration and monitoring of the sector AP.
Highlights
- Sector coverage reaches 120° with 2x2 MIMO antenna
- GPS Sync boosts network throughput by 90% for carrier-class scale
- airOS 8 adds real-time RF analytics and airMAX ac protocol
- Tool-free three-axis alignment assembles in seconds for fast deployment
- Gigabit Ethernet with PoE support simplifies single-cable installation
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Model | LiteAP AC |
| Part Number | LAP-120-US |
| Type | Wireless Bridge |
| Specifications | Technical Information: Wireless LAN Standard: IEEE 802.11ac Frequency Band: 5GHz Wireless Transmission Speed: 450 Mbit/s MIMO Technology: Yes Interfaces/Ports: Ethernet Technology: Gigabit Ethernet Number of Network (RJ-45) Ports: 1 PoE PD Port: Yes Form Factor: Pole-mountable, Ball Joint Package Contents: 2x2 MIMO airMAX ac Sector AP Pole Mounting Kit 24V, 0.5A Gigabit PoE Adapter Environmentally Friendly: Yes Environmental Compliance: Restriction of Hazardous Substances (RoHS) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) |
| Shipping weight | 0.91 kg |
| Package size | 480 × 104 × 79 mm |
Questions about this item
How do I install the LAP-120 sector antenna and what is the common mistake?
Assemble the three-axis ball joint by hand, then use a single wrench for the pole-mounting kit; the step people miss is tightening the wrench enough to prevent wind shift.
What maintenance or replacement will the LAP-120 need later?
The 24V 0.5A Gigabit PoE adapter is the only field-replaceable component; the integrated radio and 2x2 MIMO antenna are sealed and not user-serviceable.
What limit appears first on the LAP-120 during sustained use?
The 450 Mbit/s wireless transmission speed caps throughput before the Gigabit Ethernet port becomes a bottleneck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
