Ubiquiti Networks
Ubiquiti Networks BULLETM2-HP(US) 2.4 GHz network antenna
A 2.4 GHz outdoor radio with integrated Type N connector plugs directly into any antenna for point-to-point or point-to-multipoint links up to 100 Mbit/s
- StandardsIEEE 802.11n
- Interface100 Mbit/s
- Integrated Type N connector eliminates RF cables
- Up to 600 mW output powers long-distance links
- Weatherproof enclosure withstands outdoor conditions
- IEEE 802.11n standard delivers 100 Mbps throughput
- Signal-strength LED meter simplifies antenna alignment
Integrated Outdoor Radio
The Ubiquiti Bullet M2 HP is a self-contained 2.4 GHz radio that threads directly onto any antenna with a Type N female connector. It combines the radio and RF interface in a single weatherproof housing, removing the need for separate RF cables or an enclosure. The unit supports IEEE 802.11n operation and provides a 100 Mbit/s Ethernet port for backhaul. A built-in LED signal meter assists with antenna alignment during installation.
Point-to-Point and Point-to-MultiPoint Deployments
Installers building long-range wireless bridges or sector-based access points will appreciate the plug-and-go simplicity and up to 600 mW transmit power. The integrated design eliminates cable loss, connector weatherproofing steps and mechanical strain on a separate radio board. Buyers who require 5 GHz operation, fibre uplink speeds or a radio that mounts indoors with external cabling should evaluate other product lines.
Sustained Outdoor Operation
The sealed enclosure is rated for continuous exposure to sun, rain and temperature extremes without an additional shelter. With no external RF cables to degrade, the link budget remains stable over months of service. The 100 Mbit/s Ethernet interface sets the maximum sustained throughput ceiling, so long-distance links will plateau at that rate regardless of RF conditions. The LED meter stays active during operation, allowing real-time monitoring of link health without a laptop.
Highlights
- Integrated Type N connector eliminates RF cables
- Up to 600 mW output powers long-distance links
- Weatherproof enclosure withstands outdoor conditions
- IEEE 802.11n standard delivers 100 Mbps throughput
- Signal-strength LED meter simplifies antenna alignment
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Series | BulletM2-HP-US |
| Model | BulletM2-HP |
| Standards | IEEE 802.11n |
| Interface | 100 Mbit/s |
| Shipping weight | 0.27 kg |
| Package size | 152 × 51 × 51 mm |
Questions about this item
What type of antenna connector must I already own to attach this radio?
You need an antenna with a Type N female connector; the Bullet M2 plugs directly into it.
Will this 2.4 GHz radio work alongside my existing 802.11n gear on the same band?
Yes, it uses the same 802.11n standard on 2.4 GHz so it can interoperate with compatible 802.11n devices.
How do I confirm the link is aligned and performing after installation?
The built-in signal-strength LED meter shows received signal level so you can peak the antenna alignment and verify operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
