Ubiquiti Networks
Ubiquiti LTU Pro 5 GHz PtMP Client 600 Mbit/s
A 5 GHz point-to-multipoint client radio delivering 600 Mbit/s throughput with flexible 10/20/30/40/50 MHz channel widths and an integrated high-gain dish for long-range outdoor connectivity
- PtMP client with advanced RF performance for reliable outdoor links
- Proprietary LTU technology surpasses standard 802.11 Wi-Fi limits for efficiency
- Flexible channel widths of 10/20/30/40/50 MHz avoid local interference
- Independent TX and RX frequency configuration anywhere in radio band
- Integrated high-gain dish engineered for long-range connectivity
- 600 Mbit/s throughput supports robust wireless access in remote locations
PtMP Client for LTU-Rocket Networks
The Ubiquiti LTU Pro is a 5 GHz Point-to-MultiPoint subscriber station built to connect to an LTU-Rocket BaseStation. It uses proprietary LTU technology instead of standard 802.11 Wi-Fi to deliver a 600 Mbit/s link for outdoor or remote deployments. The integrated high-gain dish antenna focuses the signal for long-range connectivity. It suits installers extending a network to multiple fixed locations.
Sustained Link Behaviour
Channel width can be set independently for transmit and receive at 10, 20, 30, 40, or 50 MHz anywhere in the band. This flexibility lets the radio dodge local interference that would degrade a fixed-channel link over time. The proprietary protocol maintains efficiency during continuous multi-client traffic without the overhead of standard Wi-Fi contention. Performance stays consistent because the BaseStation schedules every client.
Integrated Dish and Mounting
The dish antenna is built into the radio housing, so no separate antenna alignment or cabling is required. A single Ethernet cable carries both data and power to the unit. The mounting hardware secures the dish to a pole or wall for permanent outdoor installation. The all-in-one form factor reduces potential failure points at the feed line and simplifies stocking for multi-site rollouts.
Highlights
- PtMP client with advanced RF performance for reliable outdoor links
- Proprietary LTU technology surpasses standard 802.11 Wi-Fi limits for efficiency
- Flexible channel widths of 10/20/30/40/50 MHz avoid local interference
- Independent TX and RX frequency configuration anywhere in radio band
- Integrated high-gain dish engineered for long-range connectivity
- 600 Mbit/s throughput supports robust wireless access in remote locations
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the LTU Pro 5 GHz PtMP Client draw during continuous operation?
The LTU Pro uses Ubiquiti proprietary LTU technology instead of standard 802.11 Wi-Fi, with flexible channel widths of 10, 20, 30, 40, 50 MHz to avoid interference and maintain a stable link all day.
What base station hardware must I already own for this client radio to function in a PtMP setup?
It requires an LTU-Rocket as the BaseStation to operate in a Point-to-MultiPoint environment.
Will the integrated high-gain dish on this LTU Pro work alongside older 802.11-based subscriber units on the same tower?
No, the LTU Pro uses proprietary LTU technology and cannot interoperate with standard 802.11 devices; the LTU-Rocket BaseStation manages only LTU clients.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
