u-power
u-power 48000W Peak 12000W Power Inverter 48V DC 110V 220V AC Split Phase Pure Sine Wave
A 48 V DC to 110 V and 220 V AC split-phase pure sine wave inverter delivering 12 000 W continuous with 48 000 W peak, plus built-in UPS, battery charger and LCD display
- Delivers 12000W continuous power for demanding off-grid loads
- Handles 48000W peak surge to start heavy motors and compressors
- Pure sine wave output protects sensitive electronics and appliances
- Split-phase design provides simultaneous 110V and 220V AC from one unit
- Built-in UPS and battery charger keep critical circuits running during outages
Split-phase 48 V DC inverter
The u-power unit converts 48 V DC into simultaneous 110 V and 220 V AC at 60 Hz using a low-frequency pure sine-wave topology. It is built for off-grid solar installations, backup power systems and mobile applications that require both North American voltages from a single battery bank.
Continuous 12 kW across both outputs
Under sustained load the inverter delivers 6000 W on the 110 V leg and 6000 W on the 220 V leg at the same time, totalling 12000 W continuous. Peak capacity reaches 24000 W per voltage and 48000 W combined, allowing motor starts and heavy inrush currents without tripping.
Control board biased to 110 V metering
The internal control circuitry prioritises 110 V regulation, so the LCD reports full data only when 110 V is loaded; using 220 V alone shows half the actual wattage and current on the display. Buyers who need accurate 220 V-only readouts must request a custom control board.
Highlights
- Delivers 12000W continuous power for demanding off-grid loads
- Handles 48000W peak surge to start heavy motors and compressors
- Pure sine wave output protects sensitive electronics and appliances
- Split-phase design provides simultaneous 110V and 220V AC from one unit
- Built-in UPS and battery charger keep critical circuits running during outages
Specifications
| Brand | U-POWER |
|---|
Questions about this item
How much heat and fan noise should I expect from the 12000W continuous inverter when it runs all day?
The low-frequency design handles 6000W per leg continuously, so the chassis stays cooler than high-frequency units; expect moderate fan noise under heavy load but quiet operation at lighter loads.
What battery bank voltage and capacity do I need to power this 48V DC inverter?
You must supply a 48V DC battery bank — typically four 12V batteries in series — with enough amp-hour capacity to deliver the 12000W continuous load you plan to run.
Can I keep my existing 110V appliances on L1-N while adding 220V loads on L1-L2 without re-wiring the panel?
Yes; the split-phase output provides 110V on L1-N and L2-N simultaneously with 220V on L1-L2, so legacy 110V circuits and new 220V loads share the same inverter without panel changes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114711BTC
In stock
