We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal PoE injector with dual RJ45 ports and IEC power inlet

Tycon Systems

Tycon Systems TP-POE-HP-48Dx2 Dual Output PoE Injector Surge Protector

SKU CH-7P8G-P6MVT

Dual 802.3af/at PoE outputs deliver up to 70 W total with 15 kV surge protection and dual DC inputs for redundant power

  • Powers two devices from one injector with dual 802.3af/at outputs
  • Delivers up to 70W total power for high-demand PoE equipment
  • Protects connected gear with 15kV surge protection on every port
  • Accepts 12V, 24V DC or 110V AC input for flexible deployment
  • Operates reliably from -25°C to +50°C in industrial environments

Dual-output PoE injector for two devices

The Tycon Systems TP-POE-HP-48Dx2 powers two 802.3af/at compatible devices from a single injector, removing the need for a PoE switch. It accepts 110vac, 12vdc or 24vdc input and delivers 56vdc at 0.45A per port for a total of 50W. Surge protection is rated to 15kv with short-circuit, over-current and reverse-voltage safeguards. The unit operates from 25 to +50°C and mounts on a DIN rail.

Simple wiring with shielded RJ45 connections

Connect the IEC C13 mains lead, link the data-in port and run two shielded RJ45 cables to the powered devices; the injector handles the data path internally. Dual DC inputs allow a second power source for redundancy. Common issues include exceeding the 50W total budget or using unshielded cable, which can reduce surge protection effectiveness.

Check power budget and voltage before ordering

Verify that each attached device complies with 802.3af/at Mode B and that combined draw stays within 50W. Ensure your supply matches 90-264VAC 47-63hz or the stated DC ranges. Confirm the operating temperature range suits the installation environment and that DIN rail mounting is available.

Highlights

  • Powers two devices from one injector with dual 802.3af/at outputs
  • Delivers up to 70W total power for high-demand PoE equipment
  • Protects connected gear with 15kV surge protection on every port
  • Accepts 12V, 24V DC or 110V AC input for flexible deployment
  • Operates reliably from -25°C to +50°C in industrial environments

Specifications

BrandTycon Systems
ModelTP-POE-HP-48Dx2

Questions about this item

How can I verify the TP-POE-HP-48Dx2 is working correctly after installation?

Check that both RJ45 shielded ports deliver 56 VDC at up to 0.45 A each, totalling 50 W, while the unit stays within the 25 to +50 °C operating range and the 1 % ripple spec.

What comes in the box with the TP-POE-HP-48Dx2 and what must I source separately?

The injector includes an IEC C13 input connector for 90-264 VAC power; you must supply the AC cord, two Ethernet cables for the dual 802.3af/at outputs, and any DIN rail mounting hardware.

Which version of the TP-POE-HP-48Dx2 should I choose for my power environment?

The single model accepts 90-264 VAC at 47-63 Hz and also supports 12 VDC or 24 VDC via dual DC inputs, so select it when you need flexible AC or DC sourcing with 15 kV surge protection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.