We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal box with RJ45 ports and screw terminals on a DIN rail clip

Tycon Power Systems

Tycon Power Systems TP-DCDC-1256GD-VHP 56V 70W 4 Pair Gigabit Dual 802.3at PoE Inserter

SKU CH-FBPK-QBQFV

A 56V 70W DC-to-DC converter with dual 802.3at PoE inserter supplying power on all four Ethernet pairs from a 10-60VDC input

  • TypeDC to DC Converter
  • Delivers 70W over 4-pair PoE for high-power devices
  • Wide 10–60VDC input suits 12V, 24V or 48V battery systems
  • Dual DC inputs allow primary and backup power sources
  • Isolated design works with positive- or negative-ground installations
  • 80% minimum efficiency reduces waste heat across the input range

Product Identity

The Tycon TP-DCDC-1256GD-VHP is a very high power DC-to-DC converter and PoE inserter delivering 56V at 70W over all eight Ethernet conductors. It accepts a wide 10-60VDC input through a removable screw terminal and provides isolated, Gigabit-compatible 4-pair power for demanding remote installations.

Ideal Use Cases

This unit suits integrators powering Ubiquiti airFiber antennas or Axis Q6032-E, Q6034-E and Q6035-E PTZ cameras from 12V, 24V or 48V battery systems. It is not for buyers who need standard 802.3af power levels, single-pair PoE, or AC mains input without an external supply.

Installation Notes

The converter mounts on a standard DIN rail using the included kit and connects via a 5-pin compression wire terminal for up to 12 AWG conductors. Dual DC inputs allow primary and backup sources, while built-in surge, short-circuit and overload protection reduce field failures. Incorrect pinout wiring on the RJ45 shielded ports is the most common setup error.

Highlights

  • Delivers 70W over 4-pair PoE for high-power devices
  • Wide 10–60VDC input suits 12V, 24V or 48V battery systems
  • Dual DC inputs allow primary and backup power sources
  • Isolated design works with positive- or negative-ground installations
  • 80% minimum efficiency reduces waste heat across the input range

Specifications

BrandTycon Power Systems
SeriesTP-DCDC-1256Gx-VHP
ModelTP-DCDC-1256GD-VHP
TypeDC to DC Converter

Questions about this item

What DC voltage source must I already have to power the 10-60VDC input terminals?

You need a 10-60VDC source such as a 12V, 24V or 48V battery system; the removable 5-pin screw terminals accept up to 12 AWG wire for the connection.

Will the 56V 70W 4-pair output work with my Axis Q6032-E, Q6034-E or Q6035-E PTZ cameras?

Yes, the inserter is designed for those Axis models and delivers 56VDC on pins 3,4,5,6 and 1,2,7,8 up to 1.25A total, matching their high-power PoE requirements.

How can I verify the unit is delivering the specified 56V after installation?

Measure the RJ45 output with a multimeter; you should read 56VDC ±2.5% across the PoE pin pairs while the connected device is drawing power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.