TurboTorch
TurboTorch 0386-0100 Swirl Torch Tip
A swirl-flame torch tip for brazing and soldering with quick-connect fitting and external lighter ignition
- TypeNew
- Swirl flame pattern delivers even heat for brazing and soldering
- Quick-connect fitting attaches to compatible torches without tools
- External lighter ignition gives reliable starts every time
- Handles soft solder from 1/8 in to 1/2 in and silver braze from 1/8 in to 1/4 in
- Fuel flow rated at .06 cmh at 14 psig for consistent performance
TurboTorch 0386-0100 Swirl Torch Tip
This TurboTorch 0386-0100 Swirl Torch Tip is a new welding accessory designed for brazing and soldering applications. It belongs to the Extreme tip series and produces a swirl flame pattern suitable for joining copper piping and similar metals. The tip handles soft solder from 1/8 in to 1/2 in and silver braze from 1/8 in to 1/4 in.
Check torch handle and fuel supply compatibility
Verify that your torch handle matches the compatible manufacturer part numbers G-4 or PLF-A5 before ordering. The tip uses a Quick Connect connection type and requires an external lighter for ignition. Your fuel system must deliver a flow rate of 0.06 cmh at a pressure rating of 14 psig for correct operation.
Brass construction with quick-connect mounting
The brass tip body resists heat and corrosion during repeated brazing cycles. Its Quick Connect fitting locks onto compatible handles without tools, allowing fast tip changes on the job site. The 1/8 in tip size concentrates the swirl flame for precise heat placement on small joints.
Highlights
- Swirl flame pattern delivers even heat for brazing and soldering
- Quick-connect fitting attaches to compatible torches without tools
- External lighter ignition gives reliable starts every time
- Handles soft solder from 1/8 in to 1/2 in and silver braze from 1/8 in to 1/4 in
- Fuel flow rated at .06 cmh at 14 psig for consistent performance
Specifications
| Brand | Turbotorch |
|---|---|
| Type | New |
Questions about this item
Does the TurboTorch 0386-0100 Swirl Torch Tip include a handle or lighter, or must they be purchased separately?
The tip uses a Quick Connect fitting for TurboTorch handles and requires an external lighter for ignition; handle and lighter are sold separately.
How do I choose between the soft-solder and silver-braze ranges for this A-2 tip?
Use the 1/8 to 1/2 in soft-solder range for plumbing joints and the 1/8 to 1/4 in silver-braze range for stronger HVAC or refrigeration connections.
What does the 0.06 cmh fuel flow mean when the tip is running at 14 psig on a real job?
At 14 psig the tip draws 0.06 cmh of fuel, producing a focused swirl flame suited for precise brazing and soldering tasks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
