Tripp Lite
Tripp Lite UL800CB-15 10 Outlet Power Strip 15 ft Cord
A 120V power strip with 10 NEMA 5-15R outlets and a 15 ft 14-gauge cord, wall-mountable for flexible placement
- TypePower Strip
- Outlets10
- Input Voltage120V
- Cord Length15 ft.
- FeaturesPlug/Connector Type: NEMA 5-15P Receptacles: 10 x NEMA 5-15R
- Unit Dimensions17.50" x 4.00" x 1.75"
- 10 outlets power multiple devices at once
- 15 ft cord reaches distant sockets easily
- Wall-mountable design saves floor space
- 14-gauge cable handles 15 A input current
- 120 V 60 Hz matches standard mains supply
10-Outlet Power Strip for Wall or Floor Mounting
The Tripp Lite UL800CB-15 provides ten NEMA 5-15R receptacles fed by a 15 ft 14-gauge cord ending in a NEMA 5-15P plug. It accepts 120 V input at 60 Hz and is rated for 15 A total current. The metal housing measures 17.50" x 4.00" x 1.75" and weighs 5.00 lbs, with keyhole slots for secure mounting on walls or floors.
Limits of the 120 V 15 A Circuit
All ten outlets share a single 15 A branch rating, so combined draw must stay at or below that figure to avoid tripping the upstream breaker. The 14-gauge cord supports the full rating only at the stated 15 ft length; extending it with additional cords reduces capacity. No surge protection, filtering or circuit breaker is built in, so connected equipment relies entirely on the panel breaker for over-current protection.
Simple Mounting with Common Pitfalls
Keyhole slots allow the strip to hang on two screws driven into studs or suitable anchors; no brackets or tools beyond a screwdriver are required. The 15 ft cord reaches distant outlets but creates slack that must be managed to prevent tripping hazards. Ensure the mounting surface can support 5 lbs and that the plug orientation leaves the cord free of sharp bends; blocking ventilation slots on attached power bricks is the most frequent installation error.
Highlights
- 10 outlets power multiple devices at once
- 15 ft cord reaches distant sockets easily
- Wall-mountable design saves floor space
- 14-gauge cable handles 15 A input current
- 120 V 60 Hz matches standard mains supply
Specifications
| Brand | TRIPP LITE |
|---|---|
| Model | UL800CB-15 |
| Type | Power Strip |
| Outlets | 10 |
| Input Voltage | 120V |
| Cord Length | 15 ft. |
| Features | Plug/Connector Type: NEMA 5-15P Receptacles: 10 x NEMA 5-15R Power Cord/Cable: 15.0 Feet 14 Guage Input Current: 15 A Frequency: 60 Hz Form Factor: Wall-mountable Mount Type: Wall or Floor |
| Unit Dimensions | 17.50" x 4.00" x 1.75" |
| Unit Weight | 5.00 lbs. |
| Package Contents | UL800CB-15 10-Outlet 120V AC Power Strip UL800CB-15 Power Strip Warranty information Instruction manual |
| Shipping weight | 3.18 kg |
| Package size | 513 × 234 × 64 mm |
Questions about this item
How many outlets does the UL800CB-15 provide and what plug type does it use?
The strip has 10 NEMA 5-15R receptacles and a NEMA 5-15P plug for standard 120 V mains.
What does the 15 A input current rating mean for connected equipment?
It allows up to 15 amps total draw across all 10 outlets at 120 V, matching a typical branch circuit breaker.
What cord gauge and length are used, and how does that affect voltage drop?
A 14-gauge cord at 15 feet keeps resistance low, so voltage drop stays minimal for loads up to the 15 A rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



