We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tripp Lite cable tester main unit and remote in carrying case

Tripp Lite

Tripp Lite T014-001 Network Cable Tester Cat5 Cat6 Cat6a RJ11 RJ45 USB BNC 600ft

SKU CH-1NXD-5XF88 MPN T014-001

Tests continuity on RJ11, RJ45, USB and BNC cables up to 600 ft with a detachable remote unit and 9 V battery indicator

  • SpecificationsProduct Type:Testing Device
  • FeaturesBattery Size Supported:9V HDMI:No
  • Package ContentsT014-001 Network Cable Continuity Tester BNC to RJ11 Jumper
  • Tests RJ11, RJ45, USB and BNC cables with one device
  • Verifies continuity on Cat 5, Cat 6 and Cat 6a wiring
  • Checks cable runs up to 600 ft for faults
  • LED shows 9V battery status at a glance
  • Includes remote unit, BNC jumper cable and carrying case

Multi-format cable tester for installers

The Tripp Lite T014-001 checks continuity on Cat 5, Cat 6 and Cat 6a twisted-pair runs as well as RJ11 phone, USB and BNC coaxial assemblies. A single main unit pairs with a removable remote module so one person can verify end-to-end wiring on cables up to 600 ft long. It is aimed at technicians who need a single handheld tool for several common cable types.

Modular two-piece build with included accessories

The tester splits into a main unit and a detachable remote, letting the operator stay at one end while the remote sits at the far termination. A BNC-to-RJ11 jumper cable and a fitted carrying case ship in the box, keeping the adapters together for field work. Power comes from a user-supplied 9 V battery whose charge level is shown by on-board LEDs.

Passive continuity checks

The device performs unpowered wire-map tests, lighting LEDs for each conductor to show opens, shorts or miswires without applying load to the circuit. Because it only drives LED indicators, current draw is minimal and a fresh 9 V cell lasts through many test sessions. No fan or active circuitry means silent operation in quiet equipment rooms or office ceilings.

Highlights

  • Tests RJ11, RJ45, USB and BNC cables with one device
  • Verifies continuity on Cat 5, Cat 6 and Cat 6a wiring
  • Checks cable runs up to 600 ft for faults
  • LED shows 9V battery status at a glance
  • Includes remote unit, BNC jumper cable and carrying case

Specifications

BrandTripp Lite
ModelT014-001
SpecificationsProduct Type:Testing Device
FeaturesBattery Size Supported:9V
HDMI:No
Package ContentsT014-001 Network Cable Continuity Tester
BNC to RJ11 Jumper Cable
Carrying Case
Owner's Manual
Shipping weight0.23 kg
Package size184 × 114 × 44 mm

Questions about this item

What cable standards does the T014-001 support for continuity testing?

The T014-001 tests Cat5, Cat6, Cat6a, RJ11 phone, USB and BNC coax cables for continuity and wiring faults.

What physical space does the tester and its accessories need?

The kit includes the main unit, a removable remote, a BNC to RJ11 jumper cable and a carrying case for portable storage.

How do you set up the T014-001 for a cable test?

Install a 9V battery, connect the cable between the main and remote units, then press the test button to scan each pin.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.