We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tripp Lite 16-outlet metal power strip, 48 inch housing, 15 foot cord

Tripp Lite

Tripp Lite SS7415-15 16-Outlet Power Strip 15 ft Cord

SKU CH-YRWM-TJZRC MPN SS7415-15

Sixteen grounded outlets and a fifteen-foot cord deliver 1800 watts of surge-protected power in a 48-inch metal housing

  • TypePower Strip
  • Outlets16
  • Output Amperage Capacity15A
  • Input Voltage120V
  • Cord Length15 ft.
  • Maximum Power1800 W
  • 16 outlets distribute power to many devices from a single 15 ft cord
  • 450-joule surge suppression shields connected equipment from voltage spikes
  • 15 A / 1800 W capacity supports high-draw loads on a 120 V circuit
  • 48-inch metal housing with adjustable mounting clips enables secure rack or wall installation
  • UL 1449 3rd Edition, UL 1363 and cUL certifications confirm tested safety compliance

16-Outlet Industrial Power Strip

The Tripp Lite SS7415-15 provides sixteen grounded outlets in a durable metal housing, distributing 120V power to workstations, networking gear and rack accessories. A 15 ft cord allows flexible placement across benches or server cabinets without needing an extension lead. It is built for technicians and facility managers who need reliable, high-density power distribution in commercial or light-industrial environments. Buyers requiring surge protection above 450 joules or a higher 20 A circuit rating should select a different unit.

15 A / 1800 W Continuous Load Rating

The single specification that decides fit is the 15 A output amperage capacity, which corresponds to a maximum continuous power draw of 1800 W at 120V. Every connected device must stay within this combined limit to avoid tripping the internal breaker or overheating the cord. The strip carries UL 1449 3rd Edition and UL 1363 certifications, confirming it meets North American safety standards for relocatable power taps. Installations that exceed 15 A require a dedicated higher-rated circuit and a different power distribution unit.

450 Joule Surge Suppression Under Sustained Events

The unit clamps transient voltage spikes with a 450 joule AC suppression rating, protecting attached equipment during repeated utility fluctuations or nearby switching events. Its metal housing and internal components are rated for continuous operation at the full 15 A load without derating, so thermal performance remains stable during extended use. The 48-inch by 1.5-inch profile mounts flat against racks or walls using the included adjustable clips, keeping the strip secure where vibration or cable tension could dislodge lighter plastic units.

Highlights

  • 16 outlets distribute power to many devices from a single 15 ft cord
  • 450-joule surge suppression shields connected equipment from voltage spikes
  • 15 A / 1800 W capacity supports high-draw loads on a 120 V circuit
  • 48-inch metal housing with adjustable mounting clips enables secure rack or wall installation
  • UL 1449 3rd Edition, UL 1363 and cUL certifications confirm tested safety compliance

Specifications

BrandTRIPP LITE
ModelSS7415-15
TypePower Strip
Outlets16
Output Amperage Capacity15A
Input Voltage120V
Cord Length15 ft.
Maximum Power1800 W
AC Suppression Joule Rating450 joule
CertificationsUL1449 3rd EDITION, UL1363, cUL
FeaturesSold as 1 Each.
Unit Dimensions48" x 1.5" x 1.5"
Unit Weight4.4
Package ContentsSS7415-15 Power Strip/Surge Suppressor
Set of adjustable mounting clips
Warranty information
Instruction manual
Shipping weight2.02 kg
Package size1321 × 89 × 58 mm

Questions about this item

What does the 15 A output amperage capacity mean once the strip is in a real machine?

It limits the total continuous draw of every plugged-in device to 15 A at 120 V, so the combined load must stay at or below 1800 W to avoid tripping the internal breaker.

How does the UL1449 3rd Edition certification cap surge protection in practice?

The certification confirms the 450 joule AC suppression rating, meaning the strip can absorb up to 450 joules of transient energy before the protective components degrade.

What do the 48 x 1.5 x 1.5 inch dimensions and included clips require for mounting?

The metal housing measures 48 inches long by 1.5 inches wide and deep; the adjustable clips screw into a rack, wall or bench and hold the strip by its narrow profile.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.