We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey steel wall-mount rack cabinet, 2U low-profile vertical enclosure, 19-inch rack rails, 20-inch depth, 150 lb capacity

Tripp Lite

Tripp Lite SRWF2U 2U Wall-Mount Server Rack 150 lb

SKU CH-E4H5-03VTS MPN SRWF2U

Wall-mount steel cabinet holds 2U of 19 in. rack gear up to 20 in. deep with 150 lb capacity

  • TypeWall Mount Cabinet
  • Rack Units5U
  • MaterialSteel
  • SpecificationForm Factor:Wall Mountable
  • FeaturesPackage Contents: SmartRack SRWF2U Rack Cabinet 12 x M6 Scre
  • Unit DimensionHeight:28.8" x Width:25.6" x Depth:9.7"
  • Holds 2U of 19 in. rack gear up to 20 in. deep
  • Supports up to 150 lb load capacity for heavy equipment
  • Adds 1U extra space for patch panels or accessories
  • Compact 28.8" x 25.6" x 9.7" steel cabinet fits tight spaces
  • Includes 12 M6 screws, 12 cup washers, 12-24 screws and 2 keys

2U Vertical Wall-Mount Rack

The Tripp Lite SRWF2U is a steel wall-mount cabinet that holds two rack units of 19-inch equipment up to 20 inches deep. It suits network closets, retail back-rooms or small offices where floor space is unavailable but a secure, lockable enclosure is required.

Mounting Hardware and Extra Patch-Panel Space

The package includes twelve M6 screws with cup washers, twelve 12-24 screws and two keys for the front door. An additional 1U of vertical space above the primary 2U compartment lets installers mount a patch panel or cable-management bar without consuming equipment depth.

150 lb Load Limit and Fixed 9.7-Inch Depth

The cabinet supports a maximum distributed load of 150 lbs, so heavier switches or small servers must stay within that rating. Its overall depth is fixed at 9.7 inches, meaning equipment deeper than 20 inches cannot be accommodated and the unit cannot be recessed further into the wall.

Highlights

  • Holds 2U of 19 in. rack gear up to 20 in. deep
  • Supports up to 150 lb load capacity for heavy equipment
  • Adds 1U extra space for patch panels or accessories
  • Compact 28.8" x 25.6" x 9.7" steel cabinet fits tight spaces
  • Includes 12 M6 screws, 12 cup washers, 12-24 screws and 2 keys

Specifications

BrandTripp Lite
ModelSRWF2U
TypeWall Mount Cabinet
Rack Units5U
MaterialSteel
SpecificationForm Factor:Wall Mountable
FeaturesPackage Contents:
SmartRack SRWF2U Rack Cabinet
12 x M6 Screws
12 x M6 Cup Washers
12 x 12-24 Screws
2 x Keys
Owner's Manual
Unit DimensionHeight:28.8" x Width:25.6" x Depth:9.7"
Unit Weight29 lb
Shipping weight15.88 kg
Package size864 × 673 × 241 mm

Questions about this item

Will the included M6 and 12-24 screws need replacing if I swap equipment later?

The package supplies 12 M6 screws, 12 M6 cup washers and 12 12-24 screws; reusing them is normal unless threads strip or heads round off during repeated changes.

What stops me from loading the full 150 lb capacity on the 2U vertical rails?

The 20 in. maximum equipment depth and the wall's own mounting strength become the practical limits before the 150 lb rating is reached.

How much heat builds up inside the 9.7 in. deep cabinet when gear runs 24/7?

The vented steel sides and open top and bottom rely on passive airflow; with no forced-air fans, sustained loads depend on room temperature and equipment exhaust direction.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.