We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey steel wall-mount server rack with clear acrylic front door, 18U 13in deep

Tripp Lite

Tripp Lite SRW18US13G 18U Wall-Mount Server Rack 13in Deep

SKU CH-0JB1-90DKQ MPN SRW18US13G

Wall-mountable 18U cabinet holds 19 in. rack gear up to 13 in. deep, swings on a hinge for rear access, and includes a clear acrylic front window

  • TypeWall Mount Cabinet
  • Rack Units18U
  • MaterialAcrylic Window Steel
  • SpecificationForm Factor:Wall Mountable
  • FeaturesPackage Contents: SmartRack SRW18US13G Rack Cabinet 42 x M6
  • Unit DimensionHeight:35.6" x Width:23.6" x Depth:13"
  • Holds 18U of 19 in. rack equipment up to 13 in. deep
  • Supports up to 200 lbs of mounted hardware for stable installation
  • Hinged back swings away from wall for easy rear access
  • Front door features shatter-resistant clear acrylic window for visibility
  • Includes 42 M6 screws, cage nuts, washers and 12-24 screws for mounting

18U Wall-Mount Rack Cabinet

The Tripp Lite SRW18US13G is an 18U wall-mount enclosure that secures 19 in. rack equipment up to 13 in. deep. It suits small server rooms, branch offices or network closets where floor space is limited but standard rack gear must be housed securely.

Hinged Back Access and Acrylic Window

A hinged back panel swings away from the wall so technicians can reach rear cabling and equipment without removing the cabinet. The front door features a shatter-resistant clear acrylic window for at-a-glance status checks while keeping hardware locked behind the door.

200 lb Load Capacity for Dense Deployments

The steel frame supports a maximum load of 200 lbs, allowing dense stacks of switches, patch panels or shallow servers within the 13 in. depth. Installers receive 42 sets of M6 and 12-24 hardware plus two keys, so the cabinet is ready for immediate rack-mount assembly.

Highlights

  • Holds 18U of 19 in. rack equipment up to 13 in. deep
  • Supports up to 200 lbs of mounted hardware for stable installation
  • Hinged back swings away from wall for easy rear access
  • Front door features shatter-resistant clear acrylic window for visibility
  • Includes 42 M6 screws, cage nuts, washers and 12-24 screws for mounting

Specifications

BrandTripp Lite
ModelSRW18US13G
TypeWall Mount Cabinet
Rack Units18U
MaterialAcrylic Window
Steel
SpecificationForm Factor:Wall Mountable
FeaturesPackage Contents:
SmartRack SRW18US13G Rack Cabinet
42 x M6 Screws
42 x M6 Cage Nuts
42 x M6 Washers
42 x 12-24 Screws
2 x Keys
Owner's Manual
Unit DimensionHeight:35.6" x Width:23.6" x Depth:13"
Unit Weight83.77 lb
Shipping weight44.45 kg
Package size914 × 610 × 356 mm

Questions about this item

How do I mount the 18U rack to the wall, and which step do people miss?

Use the hinged back section to secure the cabinet to wall studs first, then hang the main enclosure on the hinge pins — installers often skip verifying stud alignment before drilling.

What hardware will need replacement after repeated opening of the hinged back?

The hinge pins and mounting screws carry the 83.77 lb weight each swing; inspect them annually and replace any that show elongation or corrosion.

At what load does the 13-inch deep cabinet hit its structural limit during continuous operation?

The 200 lb maximum load capacity is the first limit reached; exceeding it risks wall-mount failure before any other component is stressed.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.