Tripp Lite
Tripp Lite SMART750RMXL2UN 750VA 750W 120V UPS
Line-interactive sine-wave UPS delivers 750 VA and 750 W with eight 120 V outlets, extended runtime and a network card in a 2U rack/tower form
- 750 VA line-interactive UPS provides continuous sine-wave output
- 750 W real power supports full load without derating
- 120 V input and output matches standard North American circuits
- Included network card enables remote monitoring and management
- 2U rack/tower form factor fits standard cabinets or desktop placement
What this UPS is and who it serves
The Tripp Lite SmartPro SMART750RMXL2UN is a line-interactive UPS that delivers 750 VA and 750 W of pure sine-wave power at 120 V. It fits a 2U rack or tower chassis and provides eight rear outlets for connected equipment. An LCD status panel, USB and DB9 ports, and a pre-installed network management card give IT staff local and remote monitoring. This unit suits small server rooms, network closets or edge deployments that need clean power for sensitive loads.
What it replaces and when the upgrade makes sense
It replaces older standby or simulated-sine-wave units that can cause instability in modern active-PFC power supplies. The step up is justified when equipment requires true sine-wave output during battery operation or when extended runtime modules are needed for longer outages. The included network card also removes the need for a separate accessory purchase, simplifying deployment in managed environments.
Capacity, headroom and limits
The 750 W rating comfortably handles a typical rackmount server, a switch and a firewall simultaneously while leaving margin for short peaks. Runtime at full load is limited to a few minutes, so the unit is intended to bridge brief interruptions or allow graceful shutdown rather than sustain long-term operation. Adding external battery packs extends autonomy, but the internal charger capacity remains fixed at the rated output.
Highlights
- 750 VA line-interactive UPS provides continuous sine-wave output
- 750 W real power supports full load without derating
- 120 V input and output matches standard North American circuits
- Included network card enables remote monitoring and management
- 2U rack/tower form factor fits standard cabinets or desktop placement
Specifications
| Brand | TRIPP LITE |
|---|---|
| Shipping weight | 20.87 kg |
| Package size | 596 × 470 × 216 mm |
Questions about this item
What rack height does this 2U unit require?
The UPS occupies 2U of rack space and can also be used as a tower.
How is the included network card installed, and what step is often missed?
Slide the card into the expansion slot, secure it with the thumbscrew, then configure its IP address through the management interface.
When will the internal battery need replacement?
Expect to replace the battery after three to five years depending on discharge cycles and ambient temperature.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
