We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U rackmount UPS with front status LEDs and six rear outlets

Tripp Lite

Tripp Lite SMART1000RM1UN 1000VA 800W 1U Rack UPS

SKU CH-03X7-2N3MG MPN SMART1000RM1UN

1U rack UPS delivers 1000VA sine-wave power with automatic voltage correction from 83V to 147V, six outlets and a pre-installed network card

  • Input Voltage Range120V AC
  • Input ConnectionNEMA 5-15P
  • VA Rating1000 VA
  • Watts800 Watts
  • Output Voltage120V
  • Outlets6

VA 1000 VA w/ WEBCARDLX

  • Sine-wave output protects sensitive equipment
  • Corrects voltage from 83V to 147V without battery drain
  • Pre-installed WEBCARDLX enables remote network management
  • Two outlets switchable via network for load control
  • 14 minutes runtime at 400W half load

1U Rackmount UPS with Sine Wave Output

The Tripp Lite SMART1000RM1UN is a line-interactive UPS that delivers 1000 VA and 800 W of sine wave power in a 1U rackmount chassis. It corrects brownouts and overvoltages from 83V to 147V without using battery power. Six NEMA 5-15R outlets provide protected connections for servers and network gear.

Verify 120V Input and NEMA 5-15P Compatibility

Confirm that your facility supplies 120V AC and that the NEMA 5-15P input plug matches your power source or PDU. The unit requires a standard 15-amp circuit and fits a 1U rack space measuring 1.75 inches in height. Ensure the 16.75-inch depth clears your rack rails and cable management.

Replaces Non-Sine-Wave or Tower Units

This model replaces standby or simulated-sine-wave UPS units when connected equipment requires pure sine wave output. It also upgrades tower-form-factor backups to a 1U rackmount design with a pre-installed WEBCARDLX network interface for remote management. The jump is worth it when you need network-managed, switchable outlets and automatic voltage regulation in a compact rack footprint.

Highlights

  • Sine-wave output protects sensitive equipment
  • Corrects voltage from 83V to 147V without battery drain
  • Pre-installed WEBCARDLX enables remote network management
  • Two outlets switchable via network for load control
  • 14 minutes runtime at 400W half load

Specifications

BrandTRIPP LITE
ModelSMART1000RM1UN
Input Voltage Range120V AC
Input ConnectionNEMA 5-15P
VA Rating1000 VA
Watts800 Watts
Output Voltage120V
Outlets6
Outlet Type5-15R
Battery TypeValve Regulated Lead Acid (VRLA)
Battery Run TimeFull Load Runtime (minute): 4 minutes (800 Watts)
Half Load Runtime (minute): 14 minutes (400 Watts)
Battery ReplaceableRBC69-1U
AlarmsAudible alarm indicates power-failure, overload and low-battery conditions
Interface PortDB9 Serial; EPO (emergency power off); Pre-installed network card; USB
Management SoftwarePowerAlert Software
ApprovalsTested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Rackmountable1U
Surge Energy Rating450 Joules
Features1000 VA / 800 Watts line interactive 1U rackmount UPS, Sine Wave
120V output, Corrects brownouts and overvoltages from 83V to 147V
0.8 Power Factor, Front panel status LEDs
Mounting brackets support 2 and 4 post installation
99% line-mode efficiency, 2 switched load banks
USB, RS232, EPO and PRE-INSTALLED SNMPWEBCARD
120V NEMA 5-15P input, 6 x NEMA 5-15R outlets
Dimensions1.75" x 17.50" x 16.75"
Weight32.00 lbs.
Shipping weight15.88 kg
Package size584 × 546 × 127 mm

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and do I need to buy any cables or batteries separately?

The UPS ships with the WEBCARDLX network card already installed, a USB cable, a DB9 serial cable, mounting brackets for two- and four-post racks and the internal VRLA battery. No extra battery or cables are required for basic operation.

Should I choose a different VA or wattage model for my load?

This unit delivers 1000 VA and 800 watts at a 0.8 power factor; select it when your connected equipment draws up to 800 watts. A lower-wattage model would not support that load, while a higher-wattage model adds capacity you do not need.

What does the 4-minute runtime at full load mean for my servers?

At the full 800-watt load the battery lasts 4 minutes, enough for an orderly shutdown. At a typical half load of 400 watts the runtime extends to 14 minutes, giving more time for automated scripts to complete.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.