We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite Smart 1000VA 800W Rackmount UPS 120V

SKU CH-EDA0-4QJR2

Rackmount UPS delivers 1000VA pure sine wave power with AVR correcting 83V-147V input, 6 outlets, 450-joule surge protection, USB and DB9 management ports, hot-swap batteries.

  • Pure sine wave output protects sensitive servers
  • AVR corrects 83V-147V input to 120V without battery drain
  • Hot-swap batteries enable replacement without powering down equipment
  • Two switchable load banks allow remote reboot or load shedding
  • 99% line-mode efficiency reduces energy cost and heat

Rackmount UPS for servers and telecom

The Tripp Lite Smart 1000VA 800W unit delivers pure sine wave output to protect rack-mounted servers, network storage and telecom hardware. Automatic voltage regulation maintains 120V nominal output across an 83V to 147V input range without drawing battery power. It occupies 1U of rack space and includes a 10-ft NEMA 5-15P input cord.

Build integration and load management

Six NEMA 5-15R outlets are split into two switchable load banks, each with one remotely controllable outlet for rebooting equipment or shedding nonessential loads. USB and DB9 ports enable unattended shutdown via PowerAlert software, while optional network management cards add remote monitoring. The 99% line-mode efficiency reduces energy waste and heat in the rack.

Capacity and runtime limits

The 800W / 1000VA rating supports half load for up to 14 minutes and full load for up to 4 minutes, giving time for graceful shutdown during outages. A 450-joule surge suppression rating and EMI/RFI filtering guard connected gear from transients and line noise. Internal batteries are hot-swappable for field replacement without powering down critical loads. Buyers needing longer runtime at full load or higher wattage capacity should consider larger units.

Highlights

  • Pure sine wave output protects sensitive servers
  • AVR corrects 83V-147V input to 120V without battery drain
  • Hot-swap batteries enable replacement without powering down equipment
  • Two switchable load banks allow remote reboot or load shedding
  • 99% line-mode efficiency reduces energy cost and heat

Specifications

BrandTRIPP LITE

Questions about this item

How long will the 1000VA UPS sustain a full 800W load before the battery is depleted?

The internal batteries support full load for up to 4 minutes, giving time for orderly shutdown of connected servers or storage devices.

What is the audible-alarm and heat profile when the unit runs continuously in line mode?

An audible alarm signals utility loss, overload or low battery, while 99% line-mode efficiency minimises heat during all-day operation.

Which management card must already be installed to monitor this UPS over the network?

A Tripp Lite WEBCARDLX or compatible network management card is required for remote monitoring via SNMP or web browser.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.