Tripp Lite PV3000HF 3000W power inverter
- 2 NEMA 5-15/20R
- Full continuous loa…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Tripp Lite
Converts 12V DC battery power to 120V AC with 1800W continuous and 3600W peak output for running appliances
Output Peak Power 3600 W
Continuous Watts 1800 W
The Tripp Lite PV1800HF converts 12 V DC battery power into 120 V AC power for mobile or backup use. It supplies 1800 watts continuous output with a 3600 watt peak surge capacity. The unit is designed for users who need to run standard AC appliances from a vehicle or off-grid battery bank.
Under continuous maximum load the inverter pulls 200 A from the 12 V DC source, requiring adequately sized cabling and battery capacity. With no load connected the idle draw is 2.7 A. The pulse-width modulated sine wave output maintains stable voltage for typical resistive and switching loads during extended operation.
The 12 V DC side uses a hardwired connection rather than a plug, limiting quick-disconnect flexibility. Four 120 V AC outlets provide the only load connections. Output frequency is fixed at 60 Hz and the waveform is pulse-width modulated sine wave, which may not suit sensitive medical or precision equipment.
| Brand | TRIPP LITE |
|---|---|
| Model | PV1800HF |
| Input | Full continuous load - 200A at 12VDC, No load - 2.7A at 12VDC, Shutdown |
| Output Voltage | 120V AC |
| Output Peak Power | 3600 W |
| Continuous Watts | 1800W |
| Features | Allows users to run AC appliances from a properly sized 12V battery or automotive DC system Converts 12V DC battery power to 120V AC power 1800 Watts continuous output power; 3600 watts peak output power (instantaneous) 4 outlets Ultra-compact, lightweight design with all-metal housing Diagnostic LEDs indicates low battery voltage level and load level Low battery alarm with auto-shutoff prevents deep battery discharge High-efficiency operation conserves batteries to prolong run time 6 x 40 A fuses protect inverter from overload Dimensions: 4.00" x 6.00" x 15.00" Weight: 7.25 lbs. |
| Shipping weight | 4.81 kg |
| Package size | 438 × 197 × 133 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
At full load the unit draws 200 A from the 12 V source, so significant heat is produced; the built-in fan runs continuously under heavy load, creating audible airflow noise.
You must supply heavy-gauge cables rated for 200 A and a matching 200 A fuse or breaker between the 12 V battery and the inverter’s hardwired terminals.
Most resistive loads and many universal-motor tools work fine, but some older induction motors, microwave ovens or transformer-based gear may run hotter or buzz on this waveform.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?