We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray rectangular power strip with six outlets and a four-foot cord

Tripp Lite

Tripp Lite PS6 6-Outlet Power Strip 15A 120V 4ft

SKU CH-PTRA-1MT16 MPN PS6

A six-outlet power strip rated 15 A at 120 V with a 4 ft cord, UL1363 certified, a built-in circuit breaker and keyhole mounting tabs for workbench or wall installation

  • TypePower Strip
  • ColorGray
  • Outlets6
  • Output Amperage Capacity15A
  • Input Voltage120V
  • Cord Length4 ft.
  • Six outlets expand wall power for multiple devices
  • 15 A circuit breaker protects connected equipment from overloads
  • Four-foot cord reaches distant sockets without extension leads
  • Keyhole tabs allow secure wall or bench mounting
  • UL 1363 and cUL listed for verified safety compliance

Six-outlet power strip for workbench use

The Tripp Lite PS6 provides six NEMA 5-15R receptacles in a 9.5 inch gray housing rated for 15 amps at 120 volts. It suits technicians who need reliable AC distribution for bench equipment, tools or chargers. A built-in power switch and 15A circuit breaker protect connected devices from overloads. The four-foot cord reaches nearby wall outlets without excessive slack.

Keyhole tabs enable wall or floor mounting

Keyhole mounting tabs on the 1.5 inch wide by 1 inch deep chassis allow permanent installation on a workbench, wall or floor. The 1.2 inch height keeps the profile low so the strip fits under shelves or behind racks. Six outlets face the same direction for tidy cable routing in tight spaces. Gray finish resists visible scuffs in workshop environments.

Passive design runs silently with no fan

No moving parts mean zero audible noise during operation. The 0.77 pound unit draws only the power required by attached loads up to the 15A breaker limit. UL1363 and cUL certifications confirm compliance with North American safety standards for power strips. Thermal performance depends entirely on the aggregate draw of connected equipment.

Highlights

  • Six outlets expand wall power for multiple devices
  • 15 A circuit breaker protects connected equipment from overloads
  • Four-foot cord reaches distant sockets without extension leads
  • Keyhole tabs allow secure wall or bench mounting
  • UL 1363 and cUL listed for verified safety compliance

Specifications

BrandTRIPP LITE
ModelPS6
TypePower Strip
ColorGray
Outlets6
Output Amperage Capacity15A
Input Voltage120V
Cord Length4 ft.
CertificationsUL1363, cUL
FeaturesMulti-outlet power strip offers convenient power distribution in workbench, wallmount or floor mount applications
Includes 6 NEMA 5-15R output receptacles
Power switch
15A circuit breaker
Keyhole mounting tabs support permanent installation on a wide variety of surfaces
Unit Dimensions1.2" x 1.7" x 9.45"
Unit Weight0.77 lbs.
Shipping weight0.50 kg
Package size279 × 102 × 56 mm

Questions about this item

How many amps does the 15A circuit breaker allow before it trips?

The built-in circuit breaker trips if the combined load across the six NEMA 5-15R outlets exceeds 15 amps.

Will the keyhole mounting tabs fit on a standard wall stud or workbench?

The strip measures 9.45 inches long, 1.7 inches wide and 1.2 inches high, so the keyhole tabs align with common stud spacing and bench edges.

Do I need to remove a cover to reset the breaker after an overload?

No cover removal is required; just flip the rocker switch off then back on to reset the 15A breaker.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.