We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal power supply unit, grey vented cabinet, illuminated switch, compact footprint

Tripp Lite

Tripp Lite PR7 7A 13.8V DC power supply

SKU CH-A300-KT51C MPN PR7

Converts 110 V AC to a regulated 13.8 V DC output with a 7-amp capacity and automatic overcurrent protection

  • TypeDC Power Supply
  • Output Amperage Capacity7A
  • Output Voltage13.8V DC
  • CertificationsTAA Compliant
  • FeaturesDC Power Supply; 7 Amp Output; 13.8VDC; Precision Regulated
  • Converts 110 V AC to regulated 13.8 V DC output
  • 7-amp capacity supports continuous operation with automatic overcurrent protection
  • Voltage regulation holds output within 95 % of no-load value
  • Compact 4.3 × 5.5 × 9.5 inch footprint maximises rack space
  • Large heat sinks and vented cabinet enable cool, uninterrupted use

Purpose and Audience

The Tripp Lite PR7 converts 110 V AC mains into a regulated 13.8 V DC output rated at 7 amps. It is built for technicians and installers who need a compact, continuous-duty bench supply for 12 V nominal equipment such as mobile radios, security panels or test gear.

Who It Suits and Who It Does Not

The unit fits users who require TAA-compliant hardware with automatic time-controlled overcurrent protection and an illuminated on/off switch. It is not suited for applications demanding higher amperage, adjustable voltage, multiple output channels or battery-backup functionality.

Sustained Load Behaviour

Large heat sinks and a vented cabinet allow continuous operation at the full 7-amp rating while maintaining output within 95 % of the no-load value. The supply measures 4.3 inches high, 5.5 inches wide and 9.5 inches deep, weighing approximately 7.40 lb.

Highlights

  • Converts 110 V AC to regulated 13.8 V DC output
  • 7-amp capacity supports continuous operation with automatic overcurrent protection
  • Voltage regulation holds output within 95 % of no-load value
  • Compact 4.3 × 5.5 × 9.5 inch footprint maximises rack space
  • Large heat sinks and vented cabinet enable cool, uninterrupted use

Specifications

BrandTRIPP LITE
ModelPR7
Part NumberPR7
TypeDC Power Supply
Output Amperage Capacity7A
Output Voltage13.8V DC
CertificationsTAA Compliant
FeaturesDC Power Supply; 7 Amp Output; 13.8VDC; Precision Regulated AC-to-DC Conversion; TAA/GSA Compliant
Shipping weight3.63 kg
Package size305 × 229 × 110 mm

Questions about this item

What AC voltage must my wall outlet provide for the PR7 to convert to 13.8 V DC?

The unit accepts 110 V AC input and delivers a regulated 13.8 V DC output at up to 7 A.

Will the PR7’s automatic overcurrent protection interfere with older 12 V radio equipment that draws brief peak currents?

The built-in time-controlled overcurrent protection trips only on sustained overload, so short peaks from legacy gear are handled without shutdown.

How can I verify the PR7 is delivering its regulated 13.8 V DC after I switch it on?

The illuminated on/off switch lights when the unit is powered, and the regulated output holds at least 95 % of the no-load voltage under load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.