Tripp Lite
Tripp Lite PDUV20-72 PDU 36 Outlet 120V 72in 0U Vertical Rack
A 72-inch vertical PDU with 36 NEMA 5-15/20R outlets, 120 V input, a 20 A breaker and a covered switch for rack or wall mounting
- TypeBasic
- Distributes power to 36 outlets from a single 120V source
- 15-foot cord with L5-20P plug and 5-20P adapter included
- Covered lighted switch prevents accidental shutdowns
- 20A circuit breaker protects connected equipment from overloads
- 72-inch 0U vertical mount fits 19-inch racks toollessly
What This PDU Delivers
The Tripp Lite PDUV20-72 is a basic single-phase 120V power distribution unit built for networking, telecom, security and audio/video installations. It provides 36 NEMA 5-15/20R outlets fed by a 15-foot cord with an L5-20P plug and an included 5-20P adapter. The 72-inch 0U chassis mounts vertically in a 19-inch EIA rack using toolless buttons or the supplied clips and hardware.
Who It Suits And Who It Does Not
This unit fits small to mid-sized data centres, computer rooms and network closets that need straightforward 120V outlet density with a lighted, cover-protected on/off switch and a 20A circuit breaker. Sites requiring voltages other than 120V, three-phase input, metered or switched outlet control, or remote management capabilities should select a different PDU model.
The Spec That Decides Fit
The PDU delivers 120V AC single-phase power through 36 NEMA 5-15/20R outlets from a 20A L5-20P inlet with a 5-20P adapter included. Verify that your facility supply matches 120V and 20A service and that your rack accepts a 72-inch 0U vertical mount before ordering.
Highlights
- Distributes power to 36 outlets from a single 120V source
- 15-foot cord with L5-20P plug and 5-20P adapter included
- Covered lighted switch prevents accidental shutdowns
- 20A circuit breaker protects connected equipment from overloads
- 72-inch 0U vertical mount fits 19-inch racks toollessly
Specifications
| Brand | Tripp Lite |
|---|---|
| Type | Basic |
| Shipping weight | 3.43 kg |
| Package size | 1930 × 178 × 76 mm |
Questions about this item
What type of input plug does the PDUV20-72 need from my facility power source?
It comes with a 15-foot cord ending in an L5-20P plug and includes a 5-20P adapter for 120 V AC sources.
Can the 36 NEMA 5-15/20R outlets accept older NEMA 5-15 plugs from my existing equipment?
Yes, each outlet accepts both 5-15 and 5-20 plugs so legacy 15 A devices fit without adapters.
How do I verify the PDU is delivering power after mounting it in a 19-inch rack?
The lighted on/off switch glows when the unit is on and the 20 A circuit breaker remains closed if loads are within limits.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



