We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15ft C20 to C19 12 AWG power cord

Tripp Lite

Tripp Lite P036015 15ft C20 to C19 12 AWG 20A computer power cord

SKU CH-A0J9-NSQJ2 MPN P036015

A 15-foot, 12 AWG extension cord with C20-to-C19 connectors rated for 20A server and network equipment

  • Heavy-gauge 12 AWG wire handles 20 A loads for demanding server equipment
  • 15 ft length gives flexible placement between rack devices and PDU or UPS
  • C20 to C19 connectors suit high-power network switches and blade enclosures
  • Replaces or upgrades factory cords with a heavier-duty 12 AWG alternative
  • 6 m reach supports orderly cable routing in deep cabinets

15ft C20 to C19 12 AWG 20A Power Cord

The Tripp Lite P036015 is a heavy-duty extension cord built with 12 AWG wire and rated for 20A. It connects servers, routers, switches or blade enclosures to a UPS or PDU using C20 and C19 plugs. The 15-foot length gives flexibility for rack or floor placement.

Suited for high-current server and network gear

This cord fits installations where the equipment draws enough current to require a 20A-rated, heavy-gauge link between a C20 inlet and a C19 outlet. It is not intended for devices that use smaller connectors or for circuits that do not need the higher ampacity and wire gauge this cable provides.

12 AWG wire gauge and 20A rating

The 12 AWG conductor size and 20A rating are the specifications that determine whether this cord can safely handle the load. Verify that your power source and equipment both require and support this gauge and amperage before installing.

Highlights

  • Heavy-gauge 12 AWG wire handles 20 A loads for demanding server equipment
  • 15 ft length gives flexible placement between rack devices and PDU or UPS
  • C20 to C19 connectors suit high-power network switches and blade enclosures
  • Replaces or upgrades factory cords with a heavier-duty 12 AWG alternative
  • 6 m reach supports orderly cable routing in deep cabinets

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12 AWG conductors or C19/C20 connectors need periodic replacement under normal use?

The 12 AWG cable and moulded C19/C20 ends are rated for continuous 20 A service and do not have a scheduled replacement interval; inspect visually for damage if the cord is moved frequently.

What is the first limit reached when the cord runs at full 20 A load for extended periods?

The 12 AWG gauge sets the 20 A continuous-current ceiling; sustained operation at that level is the design limit before conductor heating becomes a concern.

Does the cord generate noticeable heat or draw extra power when powering a server all day?

At loads up to 20 A the 12 AWG conductors run warm but within specification; the cord itself adds no active cooling or power draw beyond normal resistive losses.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.