We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft 12AWG power extension cord with C19 to C20 connectors

Tripp Lite

Tripp Lite P036-006 6 ft 12AWG C19 to C20 computer power extension cord

SKU CH-KY3N-9Q9FV MPN P036-006

A 6 ft heavy-duty 12AWG extension cord with IEC-60320-C19 to IEC-60320-C20 connectors, rated 20A at 250V for server and blade chassis power distribution

  • TypePower Cable
  • ColorBlack
  • Length6 ft.
  • Connector Number2
  • Connector DetailConnector A: IEC-320-C19 Connector B: IEC-320-C20
  • FeaturesMolded, Heavy-Duty Power Cable, 6ft. IEC-60320-C19 to IEC-60

Length 6 ft.

  • 2 ft.
  • 6 ft.
  • 10 ft.

Struck-through versions exist but are not stocked here.

  • Extends reach by 6 ft with C19 to C20 connectors
  • 12AWG three-conductor cable supports 20 A at 250 V
  • SJTW heavy-duty jacket resists wear in server racks
  • UL, CSA and RoHS approved for compliant deployments
  • Moulded strain relief protects connections on blade server chassis

Server power extension

This 6 ft heavy-duty cord extends a C19 inlet to a C20 outlet using 12AWG conductors rated for 20 A at 250 V. It is built for server racks and blade chassis that need a thicker gauge than standard leads provide.

12AWG current capacity

The three-conductor SJTW cable carries 20 A continuously, so the limiting factor is the 20 A rating of the C19 and C20 connectors themselves. Installations drawing more than 20 A must use a different cable assembly.

Sustained thermal behaviour

UL and CSA approvals confirm the insulation and conductor sizing handle full rated current without excessive temperature rise during continuous operation. The moulded strain relief maintains secure contact through repeated heating and cooling cycles.

Highlights

  • Extends reach by 6 ft with C19 to C20 connectors
  • 12AWG three-conductor cable supports 20 A at 250 V
  • SJTW heavy-duty jacket resists wear in server racks
  • UL, CSA and RoHS approved for compliant deployments
  • Moulded strain relief protects connections on blade server chassis

Specifications

BrandTripp Lite
ModelP036-006
TypePower Cable
ColorBlack
Length6 ft.
Connector Number2
Connector DetailConnector A: IEC-320-C19
Connector B: IEC-320-C20
FeaturesMolded, Heavy-Duty Power Cable, 6ft.
IEC-60320-C19 to IEC-60320-C20
12AWG x 3C, SJTW, 20A, 250Volt
UL, CSA, RoHS Approved
Ideal for server applications, specifically Blade Server Chassis, that require a higher rated, heavier gauge cable.
Shipping weight0.51 kg
Package size220 × 198 × 58 mm

Questions about this item

What does the 20A 250V rating mean when the cord is powering a blade server chassis?

The cord can deliver up to 20 amps at 250 volts continuously, so a blade chassis drawing within that limit will run without overheating the cable.

How does the IEC-60320-C19 to C20 connection limit what equipment I can plug in?

The C19 plug fits a C20 inlet on a PDU or UPS, while the C20 connector accepts a C19 plug from the server, so both ends must match those specific IEC-60320 sockets.

What clearance does the 6 ft 12AWG SJTW cable need behind a rack?

The 6 ft length and thick 12AWG SJTW jacket require enough depth for a gentle bend radius; allow at least a few inches behind the rack so the moulded connectors sit without strain.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.