We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft extension cord with C19 female to C20 male connectors

Tripp Lite

Tripp Lite P036-003-15A computer power extension cord 3 ft 14 AWG 15A C19 to C20

SKU CH-XA1V-HYQ2N MPN P036-003-15A

A 3 ft heavy-duty extension cord with 14 AWG conductors and C19 to C20 connectors, rated 250 V and 15 A for server, router, switch, PDU or UPS power connections

  • TypeExtension Cables
  • ColorBlack
  • Length3 ft
  • Connector DetailConnector on First End:IEC 60320 C19 Connector on Second End
  • SpecificationsVoltage Rating:230 V AC
  • FeaturesDevice Supported:PDU Router Server Switch UPS Standard Warra
  • Extends reach by 3 ft with C19 to C20 connectors
  • 14 AWG conductors deliver 15 A at 250 V rating
  • Heavy-duty SJTW jacket protects wiring in demanding environments
  • Compatible with server, router, switch, PDU and UPS devices
  • RoHS certified and backed by lifetime limited warranty

Power extension for rack equipment

This three-foot cord extends a C19 outlet to a C20 inlet using 14 AWG conductors rated for 15 A at 230 V AC. The heavy-duty SJTW jacket protects the cable in data-centre and server-room environments. It connects servers, routers, switches, PDUs and UPS units that use IEC 60320 C19 and C20 connectors.

Thermals noise and power draw

The cord carries up to 15 A continuously without overheating thanks to its 14 AWG copper conductors and robust insulation. No active cooling is required and the cable produces no audible noise during normal operation. Power loss is limited to the resistive drop inherent in a three-foot 14 AWG run at rated current.

Replaces shorter or lighter leads

This extension replaces factory-supplied cords that are too short to reach a floor-mounted PDU or UPS from rack-mounted gear. It also upgrades thinner gauge cables that cannot safely handle 15 A loads. The jump is worth it when the existing lead limits placement or poses a current-capacity bottleneck.

Highlights

  • Extends reach by 3 ft with C19 to C20 connectors
  • 14 AWG conductors deliver 15 A at 250 V rating
  • Heavy-duty SJTW jacket protects wiring in demanding environments
  • Compatible with server, router, switch, PDU and UPS devices
  • RoHS certified and backed by lifetime limited warranty

Specifications

BrandTripp Lite
ModelP036-003-15A
TypeExtension Cables
ColorBlack
Length3 ft
Connector DetailConnector on First End:IEC 60320 C19
Connector on Second End:IEC 60320 C20
SpecificationsVoltage Rating:230 V AC
FeaturesDevice Supported:PDU
Router
Server
Switch
UPS
Standard Warranty:Lifetime
Shipping weight1.24 kg
Package size191 × 178 × 25 mm

Questions about this item

How do I connect the C19 female end to my PDU and what orientation mistake should I avoid?

Align the C19 female connector with the PDU's C20 male inlet so the keyed notch faces the correct direction; forcing it upside-down bends the pins and prevents a secure lock.

Will the SJTW jacket or the 14 AWG conductors need replacement after extended use?

The heavy-duty SJTW jacket resists abrasion and the 14 AWG conductors are rated for continuous 15 A service; neither requires scheduled replacement under normal conditions.

At what load does the 250 V 15 A rating become the limiting factor during sustained operation?

The cord is rated for 15 A at 250 V; drawing more than 15 A continuously will exceed the conductor and connector limits first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.