We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite P005-006 6 ft 14AWG C13 to C14 computer power extension cord

SKU CH-EXK0-XHM4X MPN P005-006

A heavy-duty 6 ft extension cable with IEC-60320-C13 to IEC-60320-C14 connectors, rated 15A at 100-250V using 14 AWG wire

  • TypeOthers
  • ColorBlack
  • Length6 ft.
  • Connector Number2
  • Connector DetailIEC-320-C13 to IEC-320-C14
  • SpecificationsConnector A:IEC-320-C13 Connector B:IEC-320-C14

Length 6 ft.

  • 1 ft.
  • 1.5 ft.
  • 2 ft.
  • 6 ft.
  • 10 ft.

Struck-through versions exist but are not stocked here.

  • Heavy-duty 14 AWG conductors handle up to 15 A continuous load
  • 6 ft length gives flexible placement for rack or desk equipment
  • IEC-60320-C13 to IEC-60320-C14 connectors fit standard PSU and PDU ports
  • UL, CSA and RoHS compliant for regulated environments
  • Molded SJTW jacket resists wear in demanding installations

Extension cable for C13 and C14 equipment

This 6 ft extension cord connects a C14 inlet to a C13 plug, letting you position servers, UPS units or PDUs farther from the wall outlet. It is built for data-centre racks and office workstations where the stock lead falls short. The 14 AWG conductors handle continuous loads without voltage drop over the rated length.

15 A rating at 100 to 250 V

The cable carries up to 15 A across the full 100 to 250 V range, so it suits most single-phase IT gear including switches, storage arrays and high-draw workstations. It is not intended for loads above 15 A or for three-phase distribution units that require thicker conductors.

Molded SJTW jacket with UL, CSA and RoHS compliance

Each end is fully molded for strain relief, and the SJTW jacket resists oil, moisture and abrasion in dense rack rows. UL and CSA listings confirm the construction meets North American safety standards, while RoHS compliance restricts hazardous substances. The black finish blends with standard cabinet colour schemes.

Highlights

  • Heavy-duty 14 AWG conductors handle up to 15 A continuous load
  • 6 ft length gives flexible placement for rack or desk equipment
  • IEC-60320-C13 to IEC-60320-C14 connectors fit standard PSU and PDU ports
  • UL, CSA and RoHS compliant for regulated environments
  • Molded SJTW jacket resists wear in demanding installations

Specifications

BrandTripp Lite
ModelP005-006
TypeOthers
ColorBlack
Length6 ft.
Connector Number2
Connector DetailIEC-320-C13 to IEC-320-C14
SpecificationsConnector A:IEC-320-C13
Connector B:IEC-320-C14
FeaturesMolded, Heavy-Duty Power Cable, 6 ft.
IEC-60320-C13 to IEC-60320-C14
14 AWG x 3C, SJTW, 15A, 100-250 Volt
UL, CSA, RoHS Compliant
Shipping weight0.32 kg
Package size343 × 259 × 33 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 14 AWG 15 A cord safely extend power to my older server that draws near 15 A?

The cable is rated 15 A at 100-250 V with 14 AWG conductors, so it can carry the full rated load of equipment drawing up to 15 A.

How can I verify the C13 and C14 ends are seated correctly after installation?

Both IEC-60320-C13 and C14 connectors are keyed; they click firmly into place and cannot be inserted upside-down.

Does the 6 ft package include any adapters or mounting hardware, or is it just the cord?

Only the moulded 6 ft C13-to-C14 extension cord is supplied; no extra adapters or mounting hardware are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.